Lines Matching +full:- +full:pins

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Álvaro Fernández Rojas <noltari@gmail.com>
11   - Jonas Gorski <jonas.gorski@gmail.com>
14   Bindings for Broadcom's BCM6328 memory-mapped pin controller.
18     const: brcm,bcm6328-pinctrl
24   '-pins$':
26     $ref: pinmux-node.yaml#
35       pins:
41       '-pins$':
42         $ref: '#/patternProperties/-pins$'
45   - $ref: pinctrl.yaml#
48   - compatible
49   - reg
54   - |
56       compatible = "brcm,bcm6328-pinctrl";
59       pinctrl_serial_led: serial_led-pins {
60         pinctrl_serial_led_data: serial_led_data-pins {
62           pins = "gpio6";
65         pinctrl_serial_led_clk: serial_led_clk-pins {
67           pins = "gpio7";
71       pinctrl_inet_act_led: inet_act_led-pins {
73         pins = "gpio11";
76       pinctrl_pcie_clkreq: pcie_clkreq-pins {
78         pins = "gpio16";
81       pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
83         pins = "gpio17";
86       pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
88         pins = "gpio18";
91       pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
93         pins = "gpio19";
96       pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
98         pins = "gpio20";
101       pinctrl_ephy0_act_led: ephy0_act_led-pins {
103         pins = "gpio25";
106       pinctrl_ephy1_act_led: ephy1_act_led-pins {
108         pins = "gpio26";
111       pinctrl_ephy2_act_led: ephy2_act_led-pins {
113         pins = "gpio27";
116       pinctrl_ephy3_act_led: ephy3_act_led-pins {
118         pins = "gpio28";
121       pinctrl_hsspi_cs1: hsspi_cs1-pins {
123         pins = "hsspi_cs1";
126       pinctrl_usb_port1_device: usb_port1_device-pins {
128         pins = "usb_port1";
131       pinctrl_usb_port1_host: usb_port1_host-pins {
133         pins = "usb_port1";