Lines Matching +full:- +full:pins

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Álvaro Fernández Rojas <noltari@gmail.com>
11   - Jonas Gorski <jonas.gorski@gmail.com>
14   Bindings for Broadcom's BCM6318 memory-mapped pin controller.
18     const: brcm,bcm6318-pinctrl
24   '-pins$':
26     $ref: pinmux-node.yaml#
37       pins:
42       '-pins$':
43         $ref: '#/patternProperties/-pins$'
46   - $ref: pinctrl.yaml#
49   - compatible
50   - reg
55   - |
57       compatible = "brcm,bcm6318-pinctrl";
60       pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
62         pins = "gpio0";
65       pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
67         pins = "gpio1";
70       pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
72         pins = "gpio2";
75       pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
77         pins = "gpio3";
80       pinctrl_ephy0_act_led: ephy0_act_led-pins {
82         pins = "gpio4";
85       pinctrl_ephy1_act_led: ephy1_act_led-pins {
87         pins = "gpio5";
90       pinctrl_ephy2_act_led: ephy2_act_led-pins {
92         pins = "gpio6";
95       pinctrl_ephy3_act_led: ephy3_act_led-pins {
97         pins = "gpio7";
100       pinctrl_serial_led: serial_led-pins {
101         pinctrl_serial_led_data: serial_led_data-pins {
103           pins = "gpio6";
106         pinctrl_serial_led_clk: serial_led_clk-pins {
108           pins = "gpio7";
112       pinctrl_inet_act_led: inet_act_led-pins {
114         pins = "gpio8";
117       pinctrl_inet_fail_led: inet_fail_led-pins {
119         pins = "gpio9";
122       pinctrl_dsl_led: dsl_led-pins {
124         pins = "gpio10";
127       pinctrl_post_fail_led: post_fail_led-pins {
129         pins = "gpio11";
132       pinctrl_wlan_wps_led: wlan_wps_led-pins {
134         pins = "gpio12";
137       pinctrl_usb_pwron: usb_pwron-pins {
139         pins = "gpio13";
142       pinctrl_usb_device_led: usb_device_led-pins {
144         pins = "gpio13";
147       pinctrl_usb_active: usb_active-pins {
149         pins = "gpio40";