Lines Matching +full:std +full:- +full:grp0
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Florian Fainelli <florian.fainelli@broadcom.com>
11 - Ray Jui <rjui@broadcom.com>
12 - Scott Branden <sbranden@broadcom.com>
15 - $ref: pinctrl.yaml#
19 const: brcm,bcm11351-pinctrl
25 '-pins$':
30 '-grp[0-9]$':
102 slew-rate:
115 bias-disable: true
116 input-disable: true
117 input-enable: true
120 - pins
123 - $ref: pincfg-node.yaml#
126 - if:
193 drive-strength:
196 bias-disable: true
197 bias-pull-up: true
198 bias-pull-down: true
199 input-schmitt-enable: true
200 input-schmitt-disable: true
203 - if:
212 bias-pull-up:
214 There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available
218 bias-disable: true
221 - compatible
222 - reg
227 - |
229 compatible = "brcm,bcm11351-pinctrl";
232 dev-a-active-pins {
234 std-grp0 {
237 input-schmitt-enable;
238 bias-disable;
239 slew-rate = <1>;
240 drive-strength = <4>;
244 i2c-grp0 {
247 bias-pull-up = <720>;
248 input-enable;
252 hdmi-grp0 {
255 slew-rate = <1>;