Lines Matching +full:sdio +full:- +full:pinmux

7 - compatible:   Should be "bitmain,bm1880-pinctrl"
8 - reg:          Offset and length of pinctrl space in SCTRL.
10 Please refer to pinctrl-bindings.txt in this directory for details of the
17 includes pinmux and various pin configuration parameters, such as pull-up,
20 Each configuration node can consist of multiple nodes describing the pinmux
24 The following generic properties as defined in pinctrl-bindings.txt are valid
25 to specify in a pinmux subnode:
29 - pins:           An array of strings, each string containing the name of a pin.
32                   MIO0 - MIO111
34 - groups:         An array of strings, each string containing the name of a pin
65 - function:       An array of strings, each string containing the name of the
66                   pinmux functions. The following are the list of pinmux
69                   nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
90 - bias-disable:  No arguments. Disable pin bias.
91 - bias-pull-down: No arguments. The specified pins should be configured as
93 - bias-pull-up:   No arguments. The specified pins should be configured as
95 - input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
97 - input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
99 - slew-rate:      Integer. Sets slew rate for the specified pins.
101                   <0>  - Slow
102                   <1>  - Fast
103 - drive-strength: Integer. Selects the drive strength for the specified
117                 compatible = "bitmain,bm1880-pinctrl";
120                 pinctrl_uart0_default: uart0-default {
121                         pinmux {