Lines Matching full:hs
7 title: STMicroelectronics STM32 USB HS PHY controller
91 # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
102 st,decrease-hs-slew-rate:
103 description: Decreases the HS driver slew rate by 10%
106 st,tune-hs-dc-level:
108 Tunes the HS driver DC level
122 st,enable-hs-rftime-reduction:
123 description: Enables the HS rise/fall reduction feature
126 st,trim-hs-current:
128 Controls HS driver current trimming for choke compensation
150 st,trim-hs-impedance:
152 Controls HS driver impedance tuning for choke compensation
174 st,enable-hs-rx-gain-eq:
175 description: Enables the HS Rx gain equalizer
178 st,tune-hs-rx-offset:
180 Adjusts the HS Rx offset
190 st,no-hs-ftime-ctrl:
191 description: Disables the HS fall time control of single ended signals during pre-emphasis
198 st,enable-hs-tx-staggering:
199 description: Enables the basic staggering in HS Tx mode
258 st,tune-hs-dc-level = <2>;
260 st,enable-hs-rftime-reduction;
261 st,trim-hs-current = <15>;
262 st,trim-hs-impedance = <1>;
264 st,tune-hs-rx-offset = <2>;
276 st,tune-hs-dc-level = <2>;
278 st,enable-hs-rftime-reduction;
279 st,trim-hs-current = <15>;
280 st,trim-hs-impedance = <1>;
282 st,tune-hs-rx-offset = <2>;