Lines Matching +full:1 +full:mv
19 |_ PHY port#1 _________________ HOST controller
21 | / 1|________________|
34 maxItems: 1
37 maxItems: 1
40 maxItems: 1
43 const: 1
49 description: regulator providing 1V1 power supply to the PLL block
52 description: regulator providing 1V8 power supply to the PLL block
59 minItems: 1
65 "^usb-phy@[0|1]$":
73 maxItems: 1
110 - <1> increases the level by 5 to 7 mV
111 - <2> increases the level by 10 to 14 mV
112 - <3> decreases the level by 5 to 7 mV
130 - <1> = 19.165 mA target current / nominal + 1.56%
154 - <1> = reduce the impedance by 2 ohms
166 - <1> = threshold shift by +7 mV
167 - <2> = threshold shift by -5 mV
168 - <3> = threshold shift by +14 mV
182 - <1> = offset of +5 mV
183 - <2> = offset of +10 mV
184 - <3> = offset of -5 mV
214 const: 1
217 0 for OTG controller and 1 for Host controller.
235 - usb-phy@1
250 #address-cells = <1>;
262 st,trim-hs-impedance = <1>;
272 usbphyc_port1: usb-phy@1 {
273 reg = <1>;
275 #phy-cells = <1>;
280 st,trim-hs-impedance = <1>;