Lines Matching +full:usb +full:- +full:phy
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner R40 USB PHY
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-r40-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU0 registers
24 - description: PHY PMU1 registers
25 - description: PHY PMU2 registers
27 reg-names:
29 - const: phy_ctrl
30 - const: pmu0
31 - const: pmu1
32 - const: pmu2
36 - description: USB OTG PHY bus clock
37 - description: USB Host 0 PHY bus clock
38 - description: USB Host 1 PHY bus clock
40 clock-names:
42 - const: usb0_phy
43 - const: usb1_phy
44 - const: usb2_phy
48 - description: USB OTG reset
49 - description: USB Host 1 Controller reset
50 - description: USB Host 2 Controller reset
52 reset-names:
54 - const: usb0_reset
55 - const: usb1_reset
56 - const: usb2_reset
58 usb0_id_det-gpios:
60 description: GPIO to the USB OTG ID pin
62 usb0_vbus_det-gpios:
64 description: GPIO to the USB OTG VBUS detect pin
66 usb0_vbus_power-supply:
67 description: Power supply to detect the USB OTG VBUS
69 usb0_vbus-supply:
70 description: Regulator controlling USB OTG VBUS
72 usb1_vbus-supply:
75 usb2_vbus-supply:
79 - "#phy-cells"
80 - compatible
81 - clocks
82 - clock-names
83 - reg
84 - reg-names
85 - resets
86 - reset-names
91 - |
92 #include <dt-bindings/gpio/gpio.h>
93 #include <dt-bindings/clock/sun8i-r40-ccu.h>
94 #include <dt-bindings/reset/sun8i-r40-ccu.h>
96 phy@1c13400 {
97 #phy-cells = <1>;
98 compatible = "allwinner,sun8i-r40-usb-phy";
103 reg-names = "phy_ctrl",
110 clock-names = "usb0_phy",
116 reset-names = "usb0_reset",
119 usb1_vbus-supply = <®_vcc5v0>;
120 usb2_vbus-supply = <®_vcc5v0>;