Lines Matching +full:rk3588 +full:- +full:pcie +full:- +full:ep

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-ep.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: DesignWare based PCIe Endpoint controller on Rockchip SoCs
10   - Niklas Cassel <cassel@kernel.org>
13   RK3588 SoC PCIe Endpoint controller is based on the Synopsys DesignWare
14   PCIe IP and thus inherits all the common properties defined in
15   snps,dw-pcie-ep.yaml.
18   - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
19   - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
24       - rockchip,rk3568-pcie-ep
25       - rockchip,rk3588-pcie-ep
29       - description: Data Bus Interface (DBI) registers
30       - description: Data Bus Interface (DBI) shadow registers
31       - description: Rockchip designed configuration registers
32       - description: Memory region used to map remote RC address space
33       - description: Internal Address Translation Unit (iATU) registers
35   reg-names:
37       - const: dbi
38       - const: dbi2
39       - const: apb
40       - const: addr_space
41       - const: atu
44   - interrupts
45   - interrupt-names
50   - |
51     #include <dt-bindings/clock/rockchip,rk3588-cru.h>
52     #include <dt-bindings/interrupt-controller/arm-gic.h>
53     #include <dt-bindings/interrupt-controller/irq.h>
54     #include <dt-bindings/power/rk3588-power.h>
55     #include <dt-bindings/reset/rockchip,rk3588-cru.h>
58         #address-cells = <2>;
59         #size-cells = <2>;
61         pcie3x4_ep: pcie-ep@fe150000 {
62             compatible = "rockchip,rk3588-pcie-ep";
68             reg-names = "dbi", "dbi2", "apb", "addr_space", "atu";
72             clock-names = "aclk_mst", "aclk_slv",
84             interrupt-names = "sys", "pmc", "msg", "legacy", "err",
86             max-link-speed = <3>;
87             num-lanes = <4>;
89             phy-names = "pcie-phy";
90             power-domains = <&power RK3588_PD_PCIE>;
92             reset-names = "pwr", "pipe";