Lines Matching +full:ti +full:- +full:dp83867

1 # SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/net/ti,dp83867.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: TI DP83867 ethernet PHY
11   - $ref: ethernet-controller.yaml#
14   - Andrew Davis <afd@ti.com>
17   The DP83867 device is a robust, low power, fully featured Physical Layer
18   transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX
19   and 1000BASE-T Ethernet protocols.
21   The DP83867 is designed for easy implementation of 10/100/1000 Mbps Ethernet
28     https://www.ti.com/lit/gpn/dp83867ir
34   nvmem-cells:
40   nvmem-cell-names:
42       - const: io_impedance_ctrl
44   ti,min-output-impedance:
50   ti,max-output-impedance:
56         ti,min-output-impedance, ti,max-output-impedance properties
58         cell takes precedence over ti,max-output-impedance, which in
59         turn takes precedence over ti,min-output-impedance.
61   tx-fifo-depth:
64        Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
66   rx-fifo-depth:
69        Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
71   ti,clk-output-sel:
74       Muxing option for CLK_OUT pin.  See dt-bindings/net/ti-dp83867.h
78   ti,rx-internal-delay:
81       RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
85   ti,tx-internal-delay:
88       RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
97           should use "rgmii-id" if internal delays are desired as this may be
100   ti,dp83867-rxctrl-strap-quirk:
108   ti,sgmii-ref-clock-output-enable:
111       This denotes which SGMII configuration is used (4 or 6-wire modes).
114   ti,fifo-depth:
118       Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
122   - reg
127   - |
128     #include <dt-bindings/net/ti-dp83867.h>
130       #address-cells = <1>;
131       #size-cells = <0>;
132       ethphy0: ethernet-phy@0 {
134         tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
135         rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
136         ti,max-output-impedance;
137         ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_RCLK>;
138         ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
139         ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;