Lines Matching +full:tx +full:- +full:drive +full:- +full:strength +full:- +full:milliwatt
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christian Marangi <ansuelsmth@gmail.com>
11 - Robert Marko <robert.marko@sartura.hr>
15 IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
16 1000BASE-T PHY-s.
21 Both models have a combo port that supports 1000BASE-X and
22 100BASE-FX fiber.
25 output only pins that natively drive LED-s for up to 2 attached
29 Note that output pins can be set to drive LEDs OR GPIO, mixed
32 $ref: ethernet-phy-package.yaml#
37 - qcom,qca8072-package
38 - qcom,qca8075-package
40 qcom,package-mode:
46 ports 0-4
47 Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX
48 ports 0-4
50 ports 0-3 copper port 4
56 - qsgmii
57 - psgmii
60 qcom,tx-drive-strength-milliwatt:
61 description: set the TX Amplifier value in mv.
69 ^ethernet-phy@[a-f0-9]+$:
70 $ref: ethernet-phy.yaml#
73 qcom,dac-full-amplitude:
80 With this enabled and qcom,dac-full-bias-current
81 and qcom,dac-disable-bias-current-tweak disabled,
85 qcom,dac-full-bias-current:
93 qcom,dac-disable-bias-current-tweak disabled.
96 qcom,dac-disable-bias-current-tweak:
105 - With both FULL amplitude and FULL bias current: bias current
107 - With only DSP amplitude: bias current is set to half and
109 - With DSP bias current (included both DSP amplitude and
114 gpio-controller: true
116 '#gpio-cells':
121 - gpio-controller
129 - compatible
134 - |
135 #include <dt-bindings/leds/common.h>
138 #address-cells = <1>;
139 #size-cells = <0>;
141 ethernet-phy-package@0 {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 compatible = "qcom,qca8075-package";
147 qcom,package-mode = "qsgmii";
149 ethernet-phy@0 {
153 #address-cells = <1>;
154 #size-cells = <0>;
160 default-state = "keep";
165 ethernet-phy@1 {
169 ethernet-phy@2 {
172 gpio-controller;
173 #gpio-cells = <2>;
176 ethernet-phy@3 {
180 ethernet-phy@4 {