Lines Matching +full:1 +full:br +full:- +full:100
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrew Lunn <andrew@lunn.ch>
11 - Florian Fainelli <f.fainelli@gmail.com>
12 - Heiner Kallweit <hkallweit1@gmail.com>
14 # The dt-schema tools will generate a select statement first by using
21 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
24 - $nodename
28 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
32 - const: ethernet-phy-ieee802.3-c22
34 - const: ethernet-phy-ieee802.3-c45
36 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
41 The first group of digits is the 16 bit Phy Identifier 1
46 - items:
47 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48 - const: ethernet-phy-ieee802.3-c22
49 - items:
50 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51 - const: ethernet-phy-ieee802.3-c45
60 maxItems: 1
62 max-speed:
64 - 10
65 - 100
66 - 1000
67 - 2500
68 - 5000
69 - 10000
70 - 20000
71 - 25000
72 - 40000
73 - 50000
74 - 56000
75 - 100000
76 - 200000
80 phy-10base-t1l-2.4vpp:
84 1: Request 2.4 Vpp operating mode from link partner.
87 enum: [0, 1]
89 broken-turn-around:
96 brr-mode:
100 defined in the BroadR-Reach link mode specification under 1BR-100 and
101 1BR-10 names. The PHY must be configured to operate in BroadR-Reach mode
105 maxItems: 1
110 enet-phy-lane-swap:
117 enet-phy-lane-no-swap:
125 eee-broken-100tx:
131 eee-broken-1000t:
137 eee-broken-10gt:
143 eee-broken-1000kx:
149 eee-broken-10gkx4:
155 eee-broken-10gkr:
162 $ref: /schemas/types.yaml#/definitions/phandle-array
163 maxItems: 1
167 phy-is-integrated:
177 maxItems: 1
179 reset-names:
182 reset-gpios:
183 maxItems: 1
187 reset-assert-us:
192 reset-deassert-us:
202 rx-internal-delay-ps:
208 tx-internal-delay-ps:
218 '#address-cells':
219 const: 1
221 '#size-cells':
225 '^led@[a-f0-9]+$':
230 maxItems: 1
237 - reg
244 - reg
249 - |
250 #include <dt-bindings/leds/common.h>
253 #address-cells = <1>;
254 #size-cells = <0>;
256 ethernet-phy@0 {
257 compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
258 interrupt-parent = <&PIC>;
259 interrupts = <35 1>;
263 reset-names = "phy";
264 reset-gpios = <&gpio1 4 1>;
265 reset-assert-us = <1000>;
266 reset-deassert-us = <2000>;
269 #address-cells = <1>;
270 #size-cells = <0>;
276 default-state = "keep";