Lines Matching +full:pin +full:- +full:switches

1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Microchip KSZ Series Ethernet switches
10   - Marek Vasut <marex@denx.de>
11   - Woojung Huh <Woojung.Huh@microchip.com>
14   - $ref: /schemas/spi/spi-peripheral-props.yaml#
21       - microchip,ksz8765
22       - microchip,ksz8794
23       - microchip,ksz8795
24       - microchip,ksz8863
25       - microchip,ksz8864  # 4-port version of KSZ8895 family switch
26       - microchip,ksz8873
27       - microchip,ksz8895  # 5-port version of KSZ8895 family switch
28       - microchip,ksz9477
29       - microchip,ksz9897
30       - microchip,ksz9896
31       - microchip,ksz9567
32       - microchip,ksz8565
33       - microchip,ksz9893
34       - microchip,ksz9563
35       - microchip,ksz8563
36       - microchip,ksz8567
38   reset-gpios:
43   wakeup-source: true
45   microchip,synclko-125:
50   microchip,synclko-disable:
54       microchip,synclko-125.
56   microchip,pme-active-high:
59       Indicates if the PME pin polarity is active-high.
61   microchip,io-drive-strength-microamp:
67   microchip,hi-drive-strength-microamp:
74   microchip,lo-drive-strength-microamp:
85   - compatible
86   - reg
93           - microchip,ksz8863
94           - microchip,ksz8873
96   $ref: dsa.yaml#/$defs/ethernet-ports
99     "^(ethernet-)?ports$":
101         "^(ethernet-)?port@[0-2]$":
102           $ref: dsa-port.yaml#
105             microchip,rmii-clk-internal:
112                 and the REFCLKI pin is unconnected. For the external
115                 If microchip,rmii-clk-internal is set, ksz88x3 will provide
119             microchip,rmii-clk-internal: [ethernet]
124   - |
125     #include <dt-bindings/gpio/gpio.h>
129         fixed-link {
131             full-duplex;
136         #address-cells = <1>;
137         #size-cells = <0>;
139         pinctrl-0 = <&pinctrl_spi_ksz>;
140         cs-gpios = <&pioC 25 0>;
146             reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
148             spi-max-frequency = <44000000>;
150             ethernet-ports {
151                 #address-cells = <1>;
152                 #size-cells = <0>;
176                     phy-mode = "rgmii";
178                     fixed-link {
180                         full-duplex;
190             spi-max-frequency = <44000000>;
192             ethernet-ports {
193                 #address-cells = <1>;
194                 #size-cells = <0>;
214                     phy-mode = "rgmii";
216                     fixed-link {
218                         full-duplex;