Lines Matching +full:codec +full:- +full:gpio1

4 - compatible		: One or both of "motorola,cpcap" or "ste,6556002"
5 - reg			: SPI chip select
6 - interrupts		: The interrupt line the device is connected to
7 - interrupt-controller	: Marks the device node as an interrupt controller
8 - #interrupt-cells	: The number of cells to describe an IRQ, should be 2
9 - #address-cells	: Child device offset number of cells, should be 1
10 - #size-cells		: Child device size number of cells, should be 0
11 - spi-max-frequency	: Typically set to 3000000
12 - spi-cs-high		: SPI chip select direction
16 The sub-functions of CPCAP get their own node with their own compatible values,
19 - Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
20 - Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
21 - Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
22 - Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
23 - Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
24 - Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
25 - Documentation/devicetree/bindings/leds/leds-cpcap.txt
26 - Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
28 The only exception is the audio codec. Instead of a compatible value its
29 node must be named "audio-codec".
31 Required properties for the audio-codec subnode:
33 - #sound-dai-cells = <1>;
35 The audio-codec provides two DAIs. The first one is connected to the
44 		interrupt-parent = <&gpio1>;
46 		interrupt-controller;
47 		#interrupt-cells = <2>;
48 		#address-cells = <1>;
49 		#size-cells = <0>;
50 		spi-max-frequency = <3000000>;
51 		spi-cs-high;
53 		audio-codec {
54 			#sound-dai-cells = <1>;
59 					remote-endpoint = <&cpu_dai1>;
66 					remote-endpoint = <&cpu_dai2>;