Lines Matching full:fps

31 The Flexible Power Sequencer (FPS) allows each regulator to power up under
48 a flexible power sequencer timer or a software bit. When a FPS source of
54 When FPS event cleared (set to LOW), regulators, GPIOs and 32KHz
63 The configuration parameters of FPS is provided through sub-node "fps"
64 and their child for FPS specific. The child node name for FPS are "fps0",
67 The FPS configurations like FPS source, power up and power down slots for
72 There is need for different FPS configuration parameters based on system
78 -maxim,fps-event-source:		u32, FPS event source like external
91 -maxim,shutdown-fps-time-period-us:	u32, FPS time period in microseconds
95 -maxim,suspend-fps-time-period-us:	u32, FPS time period in microseconds
98 -maxim,device-state-on-disabled-event:	u32, describe the PMIC state when FPS
108 					will not change device state when FPS
146 	fps {
148 			maxim,shutdown-fps-time-period-us = <1280>;
149 			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
153 			maxim,shutdown-fps-time-period-us = <1280>;
154 			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
158 			maxim,shutdown-fps-time-period-us = <1280>;
159 			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_SW>;