Lines Matching +full:cs +full:- +full:number

4 provide a glue-less interface to a variety of asynchronous memory devices like
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible:		"ti,davinci-aemif"
18 			"ti,keystone-aemif"
19 			"ti,da850-aemif"
21 - reg:			contains offset/length value for AEMIF control registers
24 - #address-cells:	Must be 2. The partition number has to be encoded in the
25 			first address cell and it may accept values 0..N-1
26 			(N - total number of partitions). It's recommended to
27 			assign N-1 number for the control partition. The second
30 - #size-cells:		Must be set to 1.
32 - ranges:		Contains memory regions. There are two types of
34 			- CS-specific partition/range. If continuous, must be
38 			- control partition which is common for all CS
41 - clocks:		the clock feeding the controller clock. Required only
43 			See clock-bindings.txt
45 - clock-names:		clock name. It has to be "aemif". Required only if clock
48 			See clock-bindings.txt
50 - clock-ranges:		Empty property indicating that child nodes can inherit
53 			See clock-bindings.txt
56 Child chip-select (cs) nodes contain the memory devices nodes connected to
57 such as NOR (e.g. cfi-flash) and NAND (ti,davinci-nand, see davinci-nand.txt).
60 Required child cs node properties:
62 - #address-cells:	Must be 2.
64 - #size-cells:		Must be 1.
66 - ranges:		Empty property indicating that child nodes can inherit
69 - clock-ranges:		Empty property indicating that child nodes can inherit
73 - ti,cs-chipselect:	number of chipselect. Indicates on the aemif driver
75 			compatibles "ti,davinci-aemif" and "ti,keystone-aemif"
76 			it can be in range [0-3]. For compatible
77 			"ti,da850-aemif" range is [2-5].
79 Optional child cs node properties:
81 - ti,cs-bus-width:		width of the asynchronous device's data bus
84 - ti,cs-select-strobe-mode:	enable/disable select strobe mode
89 - ti,cs-extended-wait-mode:	enable/disable extended wait mode
95 - ti,cs-min-turnaround-ns:	minimum turn around time, ns
102 - ti,cs-read-setup-ns:		read setup width, ns
107 - ti,cs-read-strobe-ns:		read strobe width, ns
112 - ti,cs-read-hold-ns:		read hold width, ns
119 - ti,cs-write-setup-ns:		write setup width, ns
124 - ti,cs-write-strobe-ns:	write strobe width, ns
129 - ti,cs-write-hold-ns:		write hold width, ns
141 memory-controller@21000a00 {
142 	compatible = "ti,davinci-aemif";
143 	#address-cells = <2>;
144 	#size-cells = <1>;
146 	clock-names = "aemif";
147 	clock-ranges;
152 		   * Partition0: CS-specific memory range which is
158 		#address-cells = <2>;
159 		#size-cells = <1>;
160 		clock-ranges;
163 		ti,cs-chipselect = <2>;
165 		ti,cs-min-turnaround-ns = <0>;
166 		ti,cs-read-hold-ns = <7>;
167 		ti,cs-read-strobe-ns = <42>;
168 		ti,cs-read-setup-ns = <14>;
169 		ti,cs-write-hold-ns = <7>;
170 		ti,cs-write-strobe-ns = <42>;
171 		ti,cs-write-setup-ns = <14>;
174 			compatible = "ti,davinci-nand";
182 			.. see davinci-nand.txt
187 		#address-cells = <2>;
188 		#size-cells = <1>;
189 		clock-ranges;
192 		ti,cs-chipselect = <0>;
194 		ti,cs-min-turnaround-ns = <0>;
195 		ti,cs-read-hold-ns = <8>;
196 		ti,cs-read-strobe-ns = <40>;
197 		ti,cs-read-setup-ns = <14>;
198 		ti,cs-write-hold-ns = <7>;
199 		ti,cs-write-strobe-ns = <40>;
200 		ti,cs-write-setup-ns = <14>;
201 		ti,cs-bus-width = <16>;
204 			compatible = "cfi-flash";