Lines Matching +full:sets +full:- +full:of +full:- +full:ports
4 The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
9 compatible : must contain "ti,omap3-isp"
11 reg : the two registers sets (physical address and length) for the
13 the end of the SBL block. The second set contains the
17 syscon : the phandle and register offset to the Complex I/O or CSI-PHY
19 ti,phy-type : 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
20 1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
21 #clock-cells : Must be 1 --- the ISP provides two external clocks,
24 clock bindings in ../clock/clock-bindings.txt.
27 ---------------------
30 video-interfaces.txt in the same directory.
33 0 - parallel (CCDC)
34 1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
35 CSI1 -- CSIb on 3430
36 2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
37 CSI2 -- CSIa on 3430
42 vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
43 vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
46 --------------
48 lane-polarities : lane polarity (required on CSI-2)
49 0 -- not inverted; 1 -- inverted
50 data-lanes : an array of data lanes from 1 to 3. The length can
51 be either 1 or 2. (required on CSI-2)
52 clock-lanes : the clock lane (from 1 to 3). (required on CSI-2)
59 compatible = "ti,omap3-isp";
65 ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
66 #clock-cells = <1>;
67 ports {
68 #address-cells = <1>;
69 #size-cells = <0>;