Lines Matching +full:clock +full:- +full:noncontinuous

1 * Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge
3 The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
4 a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
8 - compatible: value should be "toshiba,tc358743"
9 - clocks, clock-names: should contain a phandle link to the reference clock
10 		       source, the clock input is named "refclk".
14 - reset-gpios: gpio phandle GPIO connected to the reset pin
15 - interrupts: GPIO connected to the interrupt pin
16 - data-lanes: should be <1 2 3 4> for four-lane operation,
17 	      or <1 2> for two-lane operation
18 - clock-lanes: should be <0>
19 - clock-noncontinuous: Presence of this boolean property decides whether the
20 		       MIPI CSI-2 clock is continuous or non-continuous.
21 - link-frequencies: List of allowed link frequencies in Hz. Each frequency is
22 		    expressed as a 64-bit big-endian integer. The frequency
25 For further information on the MIPI CSI-2 endpoint node properties, see
26 Documentation/devicetree/bindings/media/video-interfaces.txt.
34 		clock-names = "refclk";
35 		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
36 		interrupt-parent = <&gpio2>;
41 				remote-endpoint = <&mipi_csi2_in>;
42 				data-lanes = <1 2 3 4>;
43 				clock-lanes = <0>;
44 				clock-noncontinuous;
45 				link-frequencies = /bits/ 64 <297000000>;