Lines Matching +full:flash +full:- +full:led
1 * Analog Devices ADP1653 flash LED driver
5 - compatible: Must contain "adi,adp1653"
7 - reg: I2C slave address
9 - enable-gpios: Specifier of the GPIO connected to EN pin
11 There are two LED outputs available - flash and indicator. One LED is
12 represented by one child node, nodes need to be named "flash" and "indicator".
14 Required properties of the LED child node:
15 - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
17 Required properties of the flash LED child node:
19 - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
20 - flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
21 - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
25 adp1653: led-controller@30 {
28 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
30 flash {
31 flash-timeout-us = <500000>;
32 flash-max-microamp = <320000>;
33 led-max-microamp = <50000>;
36 led-max-microamp = <17500>;