Lines Matching +full:max +full:- +full:brightness

5 - compatible: "lacie,netxbig-leds".
6 - gpio-ext: Phandle for the gpio-ext bus.
9 - timers: Timer array. Each timer entry is represented by three integers:
10   Mode (gpio-ext bus), delay_on and delay_off.
12 Each LED is represented as a sub-node of the netxbig-leds device.
14 Required sub-node properties:
15 - mode-addr: Mode register address on gpio-ext bus.
16 - mode-val: Mode to value mapping. Each entry is represented by two integers:
17   A mode and the corresponding value on the gpio-ext bus.
18 - bright-addr: Brightness register address on gpio-ext bus.
19 - max-brightness: Maximum brightness value.
21 Optional sub-node properties:
22 - label: Name for this LED. If omitted, the label is taken from the node name.
23 - linux,default-trigger: Trigger assigned to the LED.
27 netxbig-leds {
28 	compatible = "lacie,netxbig-leds";
30 	gpio-ext = &gpio_ext;
35 	blue-power {
37 		mode-addr = <0>;
38 		mode-val = <NETXBIG_LED_OFF 0
42 		bright-addr = <1>;
43 		max-brightness = <7>;
45 	red-power {
47 		mode-addr = <0>;
48 		mode-val = <NETXBIG_LED_OFF 0
51 		bright-addr = <1>;
52 		max-brightness = <7>;
54 	blue-sata0 {
56 		mode-addr = <3>;
57 		mode-val = <NETXBIG_LED_OFF 0
61 		bright-addr = <2>;
62 		max-brightness = <7>;
64 	red-sata0 {
66 		mode-addr = <3>;
67 		mode-val = <NETXBIG_LED_OFF 0
70 		bright-addr = <2>;
71 		max-brightness = <7>;
73 	blue-sata1 {
75 		mode-addr = <4>;
76 		mode-val = <NETXBIG_LED_OFF 0
80 		bright-addr = <2>;
81 		max-brightness = <7>;
83 	red-sata1 {
85 		mode-addr = <4>;
86 		mode-val = <NETXBIG_LED_OFF 0
89 		bright-addr = <2>;
90 		max-brightness = <7>;