Lines Matching +full:touchscreen +full:- +full:max +full:- +full:pressure

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Texas Instruments TSC2004 and TSC2005 touchscreen controller
10   - Marek Vasut <marex@denx.de>
11   - Michael Welling <mwelling@ieee.org>
15     pattern: "^touchscreen(@.*)?$"
19       - ti,tsc2004
20       - ti,tsc2005
31   reset-gpios:
35   spi-max-frequency:
39   ti,x-plate-ohms:
40     description: resistance of the touchscreen's X plates in ohm (defaults to 280)
42   ti,esd-recovery-timeout-ms:
44         if the touchscreen does not respond after the configured time
48   vio-supply:
51   touchscreen-fuzz-pressure: true
52   touchscreen-fuzz-x: true
53   touchscreen-fuzz-y: true
54   touchscreen-max-pressure: true
55   touchscreen-size-x: true
56   touchscreen-size-y: true
59   - $ref: touchscreen.yaml#
60   - if:
67         spi-max-frequency: false
72   - compatible
73   - reg
74   - interrupts
77   - |
78     #include <dt-bindings/interrupt-controller/irq.h>
79     #include <dt-bindings/gpio/gpio.h>
81         #address-cells = <1>;
82         #size-cells = <0>;
83         touchscreen@48 {
86             vio-supply = <&vio>;
88             reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
89             interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
91             touchscreen-fuzz-x = <4>;
92             touchscreen-fuzz-y = <7>;
93             touchscreen-fuzz-pressure = <2>;
94             touchscreen-size-x = <4096>;
95             touchscreen-size-y = <4096>;
96             touchscreen-max-pressure = <2048>;
98             ti,x-plate-ohms = <280>;
99             ti,esd-recovery-timeout-ms = <8000>;
102   - |
103     #include <dt-bindings/interrupt-controller/irq.h>
104     #include <dt-bindings/gpio/gpio.h>
106         #address-cells = <1>;
107         #size-cells = <0>;
108         touchscreen@0 {
110             spi-max-frequency = <6000000>;
113             vio-supply = <&vio>;
115             reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
116             interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
118             touchscreen-fuzz-x = <4>;
119             touchscreen-fuzz-y = <7>;
120             touchscreen-fuzz-pressure = <2>;
121             touchscreen-size-x = <4096>;
122             touchscreen-size-y = <4096>;
123             touchscreen-max-pressure = <2048>;
125             ti,x-plate-ohms = <280>;
126             ti,esd-recovery-timeout-ms = <8000>;