Lines Matching +full:switch +full:- +full:mode +full:- +full:frequency

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Antoniu Miclaus <antoniu.miclaus@analog.com>
14    radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
21       - adi,adrf6780
26   spi-max-frequency:
34   clock-names:
36       - const: lo_in
38   clock-output-names:
41   adi,vga-buff-en:
47   adi,lo-buff-en:
53   adi,if-mode-en:
55       Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode
59   adi,iq-mode-en:
61       I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a
65   adi,lo-x2-en:
67       Double the Local Oscillator output frequency from the Local
68       Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled
72   adi,lo-ppf-en:
74       Local Oscillator input frequency equal to the Local Oscillator
75       output frequency (LO x1). Either LOx1 or LOx2 can be enabled
79   adi,lo-en:
85   adi,uc-bias-en:
91   adi,lo-sideband:
93       Switch to the Lower LO Sideband. By default the Upper LO
97   adi,vdet-out-en:
103   '#clock-cells':
107   adi,lo-x2-en: [ "adi,lo-en" ]
108   adi,lo-ppf-en: [ "adi,lo-en" ]
111   - compatible
112   - reg
113   - clocks
114   - clock-names
117   - $ref: /schemas/spi/spi-peripheral-props.yaml#
122   - |
124       #address-cells = <1>;
125       #size-cells = <0>;
129         spi-max-frequency = <1000000>;
131         clock-names = "lo_in";