Lines Matching +full:mixer +full:- +full:mode
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Antoniu Miclaus <antoniu.miclaus@analog.com>
21 - adi,admv1013
26 spi-max-frequency:
34 clock-names:
36 - const: lo_in
38 vcm-supply:
42 vcc-drv-supply:
46 vcc2-drv-supply:
50 vcc-vva-supply:
54 vcc-amp1-supply:
58 vcc-amp2-supply:
62 vcc-env-supply:
66 vcc-bg-supply:
68 Mixer Chip Band Gap Circuit voltage regulator.
70 vcc-bg2-supply:
74 vcc-mixer-supply:
76 Mixer voltage regulator.
78 vcc-quad-supply:
82 adi,detector-enable:
88 adi,input-mode:
90 Select the input mode.
91 iq - in-phase quadrature (I/Q) input
92 if - complex intermediate frequency (IF) input
95 adi,quad-se-mode:
97 Switch the LO path from differential to single-ended operation.
98 se-neg - Single-Ended Mode, Negative Side Disabled.
99 se-pos - Single-Ended Mode, Positive Side Disabled.
100 diff - Differential Mode.
101 enum: [se-neg, se-pos, diff]
103 '#clock-cells':
107 - compatible
108 - reg
109 - clocks
110 - clock-names
111 - vcm-supply
112 - vcc-drv-supply
113 - vcc2-drv-supply
114 - vcc-vva-supply
115 - vcc-amp1-supply
116 - vcc-amp2-supply
117 - vcc-env-supply
118 - vcc-bg-supply
119 - vcc-bg2-supply
120 - vcc-mixer-supply
121 - vcc-quad-supply
124 - $ref: /schemas/spi/spi-peripheral-props.yaml#
129 - |
131 #address-cells = <1>;
132 #size-cells = <0>;
136 spi-max-frequency = <1000000>;
138 clock-names = "lo_in";
139 vcm-supply = <&vcm>;
140 vcc-drv-supply = <&vcc_drv>;
141 vcc2-drv-supply = <&vcc2_drv>;
142 vcc-vva-supply = <&vcc_vva>;
143 vcc-amp1-supply = <&vcc_amp1>;
144 vcc-amp2-supply = <&vcc_amp2>;
145 vcc-env-supply = <&vcc_env>;
146 vcc-bg-supply = <&vcc_bg>;
147 vcc-bg2-supply = <&vcc_bg2>;
148 vcc-mixer-supply = <&vcc_mixer>;
149 vcc-quad-supply = <&vcc_quad>;
150 adi,quad-se-mode = "diff";
151 adi,detector-enable;