Lines Matching +full:channel +full:- +full:3
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analog Devices AD5755 Multi-Channel DAC
10 - Sean Nyekjaer <sean.nyekjaer@prevas.dk>
15 - adi,ad5755
16 - adi,ad5755-1
17 - adi,ad5757
18 - adi,ad5735
19 - adi,ad5737
24 spi-cpha:
25 description: Either this or spi-cpol but not both.
26 spi-cpol: true
28 adi,ext-dc-dc-compenstation-resistor:
34 adi,dc-dc-phase:
36 enum: [0, 1, 2, 3]
39 0: All dc-to-dc converters clock on the same edge.
40 1: Channel A and Channel B clock on the same edge,
41 Channel C and Channel D clock on opposite edges.
42 2: Channel A and Channel C clock on the same edge,
43 Channel B and Channel D clock on opposite edges.
44 3: Channel A, Channel B, Channel C, and Channel D
47 adi,dc-dc-freq-hz:
50 adi,dc-dc-max-microvolt:
52 Maximum allowed Vboost voltage supplied by the dc-to-dc converter.
55 "#address-cells":
58 "#size-cells":
61 "#io-channel-cells":
65 - compatible
66 - reg
69 "^channel@[0-7]$":
71 description: Child node to describe a channel
85 3: Plus minus 10 V voltage range.
90 adi,ext-current-sense-resistor:
95 adi,enable-voltage-overrange:
100 $ref: /schemas/types.yaml#/definitions/uint32-array
102 Array of slewrate settings should contain 3 fields:
105 3: Slew step size
107 - enum: [0, 1]
108 - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0]
109 - enum: [1, 2, 4, 16, 32, 64, 128, 256]
112 - reg
117 - required:
118 - spi-cpha
119 - required:
120 - spi-cpol
123 - $ref: /schemas/spi/spi-peripheral-props.yaml#
128 - |
130 #address-cells = <1>;
131 #size-cells = <0>;
134 #address-cells = <1>;
135 #size-cells = <0>;
138 spi-max-frequency = <1000000>;
139 spi-cpha;
140 adi,dc-dc-phase = <0>;
141 adi,dc-dc-freq-hz = <410000>;
142 adi,dc-dc-max-microvolt = <23000000>;
143 channel@0 {
146 adi,ext-current-sense-resistor;
149 channel@1 {
152 adi,ext-current-sense-resistor;
155 channel@2 {
158 adi,ext-current-sense-resistor;
161 channel@3 {
162 reg = <3>;
164 adi,ext-current-sense-resistor;