Lines Matching +full:adc +full:- +full:channels +full:- +full:used

6 The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx.
14 The Xilinx System Monitor is an ADC that is found in the UltraScale and
16 communication. Xilinx provides a standard IP core that can be used to access the
22 	- compatible: Should be one of
23 		* "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device
25 		* "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
27 		* "xlnx,system-management-wiz-1.3": When using the
30 	- reg: Address and length of the register set for the device
31 	- interrupts: Interrupt for the XADC control interface.
32 	- clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
33 	  when using the axi-xadc or the axi-system-management-wizard this must be
37 	- xlnx,external-mux:
38 		* "none": No external multiplexer is used, this is the default
40 		* "single": External multiplexer mode is used with one
42 		* "dual": External multiplexer mode is used with two
44 	- xlnx,external-mux-channel: Configures which pair of pins is used to
53 		1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8]
54 		2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9]
56 		8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15]
61 	- xnlx,channels: List of external channels that are connected to the ADC
63 		* #address-cells: Should be 1.
64 		* #size-cells: Should be 0.
66 	  The child nodes of this node represent the external channels which are
67 	  connected to the ADC. If the property is no present no external
68 	  channels will be assumed to be connected.
79 			  Note each channel number should only be used at most
82 			* xlnx,bipolar: If set the channel is used in bipolar
88 		compatible = "xlnx,zynq-xadc-1.00.a";
91 		interrupt-parent = <&gic>;
94 		xlnx,channels {
95 			#address-cells = <1>;
96 			#size-cells = <0>;
110 		compatible = "xlnx,axi-xadc-1.00.a";
113 		interrupt-parent = <&gic>;
116 		xlnx,channels {
117 			#address-cells = <1>;
118 			#size-cells = <0>;
126 	adc@80000000 {
127 		compatible = "xlnx,system-management-wiz-1.3";
130 		interrupt-parent = <&gic>;
133 		xlnx,channels {
134 			#address-cells = <1>;
135 			#size-cells = <0>;