Lines Matching +full:channel +full:- +full:2
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Linus Walleij <linus.walleij@linaro.org>
19 - qcom,pm8018-adc
20 - qcom,pm8038-adc
21 - qcom,pm8058-adc
22 - qcom,pm8921-adc
29 xoadc-ref-supply:
37 "#address-cells":
38 const: 2
44 a hardware channel on all systems.
46 "#size-cells":
49 "#io-channel-cells":
50 const: 2
57 - compatible
58 - reg
59 - "#io-channel-cells"
60 - "#address-cells"
61 - "#size-cells"
62 - adc-channel@c
63 - adc-channel@d
64 - adc-channel@f
67 "^(adc-channel@)[0-9a-f]$":
70 ADC channel specific configuration.
92 Channel calibration type. If this property is specified
93 VADC will use a special voltage references for channel
99 If the property is not found, the channel will be
106 2 = PMIC_IN/BMS_CSP
114 - reg
117 - |
118 #include <dt-bindings/interrupt-controller/irq.h>
120 #address-cells = <1>;
121 #size-cells = <0>;
124 compatible = "qcom,pm8058-adc";
126 interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
127 #address-cells = <2>;
128 #size-cells = <0>;
129 #io-channel-cells = <2>;
131 vcoin: adc-channel@0 {
134 vbat: adc-channel@1 {
137 dcin: adc-channel@2 {
140 ichg: adc-channel@3 {
143 vph_pwr: adc-channel@4 {
146 usb_vbus: adc-channel@a {
149 die_temp: adc-channel@b {
152 ref_625mv: adc-channel@c {
155 ref_1250mv: adc-channel@d {
158 ref_325mv: adc-channel@e {
161 ref_muxoff: adc-channel@f {