Lines Matching +full:com +full:- +full:supply
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michael Hennerich <Michael.Hennerich@analog.com>
11 - Nuno Sá <nuno.sa@analog.com>
14 * https://www.analog.com/en/products/ad7380.html
15 * https://www.analog.com/en/products/ad7381.html
16 * https://www.analog.com/en/products/ad7383.html
17 * https://www.analog.com/en/products/ad7384.html
18 * https://www.analog.com/en/products/ad7386.html
19 * https://www.analog.com/en/products/ad7387.html
20 * https://www.analog.com/en/products/ad7388.html
21 * https://www.analog.com/en/products/ad7380-4.html
22 * https://www.analog.com/en/products/ad7381-4.html
23 * https://www.analog.com/en/products/ad7383-4.html
24 * https://www.analog.com/en/products/ad7384-4.html
25 * https://www.analog.com/en/products/ad7386-4.html
26 * https://www.analog.com/en/products/ad7387-4.html
27 * https://www.analog.com/en/products/ad7388-4.html
30 $ref: /schemas/spi/spi-peripheral-props.yaml#
35 - adi,ad7380
36 - adi,ad7381
37 - adi,ad7383
38 - adi,ad7384
39 - adi,ad7386
40 - adi,ad7387
41 - adi,ad7388
42 - adi,ad7380-4
43 - adi,ad7381-4
44 - adi,ad7383-4
45 - adi,ad7384-4
46 - adi,ad7386-4
47 - adi,ad7387-4
48 - adi,ad7388-4
53 spi-max-frequency:
55 spi-cpol: true
56 spi-cpha: true
58 vcc-supply:
59 description: A 3V to 3.6V supply that powers the chip.
61 vlogic-supply:
63 A 1.65V to 3.6V supply for the logic pins.
65 refio-supply:
67 A 2.5V to 3.3V supply for the external reference voltage. When omitted,
70 refin-supply:
72 A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
74 aina-supply:
76 The common mode voltage supply for the AINA- pin on pseudo-differential
79 ainb-supply:
81 The common mode voltage supply for the AINB- pin on pseudo-differential
84 ainc-supply:
86 The common mode voltage supply for the AINC- pin on pseudo-differential
89 aind-supply:
91 The common mode voltage supply for the AIND- pin on pseudo-differential
96 When the device is using 1-wire mode, this property is used to optionally
101 - compatible
102 - reg
103 - vcc-supply
104 - vlogic-supply
109 # pseudo-differential chips require common mode voltage supplies,
111 - if:
115 - adi,ad7383
116 - adi,ad7384
117 - adi,ad7383-4
118 - adi,ad7384-4
121 - aina-supply
122 - ainb-supply
125 aina-supply: false
126 ainb-supply: false
127 - if:
131 - adi,ad7383-4
132 - adi,ad7384-4
135 - ainc-supply
136 - aind-supply
139 ainc-supply: false
140 aind-supply: false
142 # ad7380-4 uses refin-supply as external reference.
144 # When refio-supply is omitted, internal reference is used.
145 - if:
149 - adi,ad7380-4
152 refio-supply: false
154 - refin-supply
157 refin-supply: false
160 - |
161 #include <dt-bindings/interrupt-controller/irq.h>
164 #address-cells = <1>;
165 #size-cells = <0>;
171 spi-cpol;
172 spi-cpha;
173 spi-max-frequency = <80000000>;
176 interrupt-parent = <&gpio0>;
178 vcc-supply = <&supply_3_3V>;
179 vlogic-supply = <&supply_3_3V>;
180 refio-supply = <&supply_2_5V>;