Lines Matching +full:com +full:- +full:supply
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Ceclan Dumitru <dumitru.ceclan@analog.com>
15 The AD717x family offer a complete integrated Sigma-Delta ADC solution which
18 (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended
23 The AD411X family encompasses a series of low power, low noise, 24-bit,
24 sigma-delta analog-to-digital converters that offer a versatile range of
26 fully differential/single-ended and bipolar voltage inputs.
29 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
30 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
31 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
32 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
33 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
34 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
35 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
36 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
37 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
38 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf
39 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
40 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf
45 - adi,ad4111
46 - adi,ad4112
47 - adi,ad4114
48 - adi,ad4115
49 - adi,ad4116
50 - adi,ad7172-2
51 - adi,ad7172-4
52 - adi,ad7173-8
53 - adi,ad7175-2
54 - adi,ad7175-8
55 - adi,ad7176-2
56 - adi,ad7177-2
64 - description: |
68 - description: |
73 interrupt-names:
76 - const: rdy
77 - const: err
79 '#address-cells':
82 '#size-cells':
85 spi-max-frequency:
88 gpio-controller:
91 '#gpio-cells':
95 GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
97 vref-supply:
99 Differential external reference supply used for conversion. The reference
101 REF+ and REF- pins: Vref = (REF+) - (REF-).
103 vref2-supply:
105 Differential external reference supply used for conversion. The reference
107 REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-).
109 avdd-supply:
110 description: Avdd supply, can be used as reference for conversion.
111 This supply is referenced to AVSS, voltage specified here
112 represents (AVDD1 - AVSS).
114 avdd2-supply:
115 description: Avdd2 supply, used as the input to the internal voltage regulator.
116 This supply is referenced to AVSS, voltage specified here
117 represents (AVDD2 - AVSS).
119 iovdd-supply:
120 description: iovdd supply, used for the chip digital interface.
128 clock-names:
130 - ext-clk
131 - xtal
133 '#clock-cells':
137 "^channel@[0-9a-f]$":
147 diff-channels:
155 (VIN2, VINCOM) -> diff-channels = <2 16>
162 Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2,
163 must be paired together and can be used to monitor the power supply
172 single-channel:
175 input of a voltage channel (single-ended or pseudo-differential).
178 Example: (IIN2+, IIN2−) -> single-channel = <2>
179 To correctly configure a current channel set the "adi,current-channel"
182 To configure a single-ended/pseudo-differential channel set the
183 "common-mode-channel" property to the desired negative voltage input.
189 common-mode-channel:
192 single-ended or pseudo-differential voltage channel.
198 adi,reference-select:
204 refout-avss: REFOUT/AVSS (Internal reference)
207 External reference ref2 only available on ad7173-8 and ad7172-4.
208 Internal reference refout-avss not available on ad7172-4.
213 - vref
214 - vref2
215 - refout-avss
216 - avdd
217 default: refout-avss
219 adi,current-channel:
226 - reg
229 - oneOf:
230 - required: [single-channel]
232 diff-channels: false
233 - required: [diff-channels]
235 single-channel: false
236 adi,current-channel: false
237 common-mode-channel: false
239 - if:
240 required: [common-mode-channel]
243 adi,current-channel: false
246 - compatible
247 - reg
250 - $ref: /schemas/spi/spi-peripheral-props.yaml#
252 # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
253 - if:
259 - adi,ad7172-4
260 - adi,ad7173-8
261 - adi,ad7175-8
264 vref2-supply: false
266 "^channel@[0-9a-f]$":
268 adi,reference-select:
270 - vref
271 - refout-avss
272 - avdd
274 - if:
279 - adi,ad4114
280 - adi,ad4115
281 - adi,ad4116
282 - adi,ad7173-8
283 - adi,ad7175-8
286 "^channel@[0-9a-f]$":
291 - if:
296 - adi,ad7172-2
297 - adi,ad7175-2
298 - adi,ad7176-2
299 - adi,ad7177-2
302 "^channel@[0-9a-f]$":
307 # Model ad7172-4 does not support internal reference
308 - if:
312 const: adi,ad7172-4
315 "^channel@[0-9a-f]$":
319 adi,reference-select:
321 - vref
322 - vref2
323 - avdd
325 - adi,reference-select
327 - if:
332 - adi,ad4111
333 - adi,ad4112
334 - adi,ad4114
335 - adi,ad4115
336 - adi,ad4116
339 avdd2-supply: false
341 - if:
347 - adi,ad4111
348 - adi,ad4112
351 "^channel@[0-9a-f]$":
353 adi,current-channel: false
355 - if:
357 - required: [clock-names]
358 - required: [clocks]
361 '#clock-cells': false
366 # Example AD7173-8 with external reference connected to REF+/REF-:
367 - |
368 #include <dt-bindings/gpio/gpio.h>
369 #include <dt-bindings/interrupt-controller/irq.h>
372 #address-cells = <1>;
373 #size-cells = <0>;
376 compatible = "adi,ad7173-8";
379 #address-cells = <1>;
380 #size-cells = <0>;
383 interrupt-names = "rdy";
384 interrupt-parent = <&gpio>;
385 spi-max-frequency = <5000000>;
386 gpio-controller;
387 #gpio-cells = <2>;
388 #clock-cells = <0>;
390 vref-supply = <&dummy_regulator>;
395 diff-channels = <0 1>;
396 adi,reference-select = "vref";
401 diff-channels = <2 3>;
407 diff-channels = <4 5>;
413 diff-channels = <6 7>;
418 diff-channels = <8 9>;
419 adi,reference-select = "avdd";
424 # Example AD4111 with current channel and single-ended channel:
425 - |
426 #include <dt-bindings/gpio/gpio.h>
427 #include <dt-bindings/interrupt-controller/irq.h>
430 #address-cells = <1>;
431 #size-cells = <0>;
437 #address-cells = <1>;
438 #size-cells = <0>;
441 interrupt-names = "rdy";
442 interrupt-parent = <&gpio>;
443 spi-max-frequency = <5000000>;
444 gpio-controller;
445 #gpio-cells = <2>;
446 #clock-cells = <0>;
451 diff-channels = <4 5>;
458 single-channel = <2>;
459 common-mode-channel = <16>;
462 // Current channel IN2+/IN2-
465 single-channel = <2>;
466 adi,current-channel;