Lines Matching +full:i2c +full:- +full:gpio
1 * Linear Technology / Analog Devices I2C bus switch
5 - compatible: Must contain one of the following.
7 - reg: The I2C address of the device.
11 - Standard I2C mux properties. See i2c-mux.yaml in this directory.
12 - I2C child bus nodes. See i2c-mux.yaml in this directory.
16 - enable-gpios: Reference to the GPIO connected to the enable input.
17 - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
19 multiplexers on the bus and the devices behind them use same I2C addresses.
20 - gpio-controller: Marks the device node as a GPIO Controller.
21 - #gpio-cells: Should be two. The first cell is the pin number and
23 See ../gpio/gpio.txt for more information.
24 - ltc,downstream-accelerators-enable: Enables the rise time accelerators
26 - ltc,upstream-accelerators-enable: Enables the rise time accelerators
31 ltc4306: i2c-mux@4a {
33 #address-cells = <1>;
34 #size-cells = <0>;
37 gpio-controller;
38 #gpio-cells = <2>;
40 i2c@0 {
41 #address-cells = <1>;
42 #size-cells = <0>;
51 i2c@1 {
52 #address-cells = <1>;
53 #size-cells = <0>;