Lines Matching +full:summation +full:- +full:disable

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Jean Delvare <jdelvare@suse.com>
11   - Guenter Roeck <linux@roeck-us.net>
20   ti,single-shot:
22       This chip has two power modes: single-shot (chip takes one measurement
25       hardware monitor type device, but the single-shot mode is more power-
26       friendly and useful for battery-powered device which cares power
29       If this property is present, the single-shot mode will be used, instead
33   "#address-cells":
37   "#size-cells":
42   "^input@[0-2]$":
46       in device-tree, input channels will be enabled.
58       shunt-resistor-micro-ohms:
59         description: shunt resistor value in micro-Ohm
61       ti,summation-disable:
64           summation control function. This function adds the single
65           shunt-voltage conversions for the desired channels in order to
66           compare the combined sum to the programmed limit. The Shunt-Voltage
68           to the value in the Shunt-Voltage Sum register in order to
70           shunt-voltage sum limit value is exceeded, the critical alert pin
73           For the summation limit to have a meaningful value, it is necessary
74           to use the same shunt-resistor value on all enabled channels. If
77           exclude specific channels from the summation control function.
81       - reg
84   - compatible
85   - reg
90   - |
92         #address-cells = <1>;
93         #size-cells = <0>;
95         power-sensor@40 {
98             #address-cells = <1>;
99             #size-cells = <0>;
105                  * to disable, must be explicitly disabled in device-tree.
112                 shunt-resistor-micro-ohms = <5000>;
118                 shunt-resistor-micro-ohms = <5000>;