Lines Matching full:connected

19   When used in practice, a thermistor is often connected between ground, a
34      / |                        | "connected ground"
41      | | (pdo)                  | "connected positive"
48   called "connected ground" and "connected positive" and shall be understood as
51   If the pull-up resistance is 0 one end of the thermistor is connected to the
56   connected to ground and we get the thermistor under the pull-up resistor
60   the figure illustrates where the voltage will be measured for the "connected
61   ground" and "connected positive" cases.
109   connected-positive:
111     description: Indicates how the thermistor is connected in series with
114       to be connected-ground, which usually means a pull-down resistance of