Lines Matching full:pull
20 pull-up resistor or/and a pull-down resistor and a fixed voltage like this:
22 + e.g. 5V = pull-up voltage (puv)
26 | | Pull-up resistor
40 | | Pull-down resistor | Measured voltage (mv)
49 the cases when either pull-up or pull-down resistance is zero.
51 If the pull-up resistance is 0 one end of the thermistor is connected to the
52 positive voltage and we get the thermistor on top of a pull-down resistor
53 and we take the measure between the thermistor and the pull-down resistor.
55 Conversely if the pull-down resistance is zero, one end of the thermistor is
56 connected to ground and we get the thermistor under the pull-up resistor
57 and we take the measure between the pull-up resistor and the thermistor.
59 We can use both pull-up and pull-down resistors at the same time, and then
97 description: Pull-up voltage in micro volts. Must always be specified.
101 description: Pull-up resistance in ohms. Must always be specified, even
106 description: Pull-down resistance in ohms. Must always be specified, even
112 a pull-up and/or a pull-down resistor. See the description above for
114 to be connected-ground, which usually means a pull-down resistance of