Lines Matching +full:opp +full:- +full:19200000

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Robert Foss <robert.foss@linaro.org>
13   MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
16 $ref: /schemas/display/msm/mdss-common.yaml#
21       - const: qcom,sm8350-mdss
25       - description: Display AHB clock from gcc
26       - description: Display hf axi clock
27       - description: Display sf axi clock
28       - description: Display core clock
30   clock-names:
32       - const: iface
33       - const: bus
34       - const: nrt_bus
35       - const: core
43   interconnect-names:
45       - const: mdp0-mem
46       - const: mdp1-mem
49   "^display-controller@[0-9a-f]+$":
55         const: qcom,sm8350-dpu
57   "^displayport-controller@[0-9a-f]+$":
63         const: qcom,sm8350-dp
65   "^dsi@[0-9a-f]+$":
72           - const: qcom,sm8350-dsi-ctrl
73           - const: qcom,mdss-dsi-ctrl
75   "^phy@[0-9a-f]+$":
81         const: qcom,sm8350-dsi-phy-5nm
86   - |
87     #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
88     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
89     #include <dt-bindings/clock/qcom,rpmh.h>
90     #include <dt-bindings/interrupt-controller/arm-gic.h>
91     #include <dt-bindings/interconnect/qcom,sm8350.h>
92     #include <dt-bindings/power/qcom,rpmhpd.h>
94     display-subsystem@ae00000 {
95         compatible = "qcom,sm8350-mdss";
97         reg-names = "mdss";
101         interconnect-names = "mdp0-mem", "mdp1-mem";
103         power-domains = <&dispcc MDSS_GDSC>;
110         clock-names = "iface", "bus", "nrt_bus", "core";
115         interrupt-controller;
116         #interrupt-cells = <1>;
118         #address-cells = <1>;
119         #size-cells = <1>;
122         display-controller@ae01000 {
123             compatible = "qcom,sm8350-dpu";
126             reg-names = "mdp", "vbif";
134             clock-names = "bus",
141             assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
142             assigned-clock-rates = <19200000>;
144             operating-points-v2 = <&mdp_opp_table>;
145             power-domains = <&rpmhpd RPMHPD_MMCX>;
147             interrupt-parent = <&mdss>;
151                 #address-cells = <1>;
152                 #size-cells = <0>;
157                         remote-endpoint = <&dsi0_in>;
162             mdp_opp_table: opp-table {
163                 compatible = "operating-points-v2";
165                 opp-200000000 {
166                     opp-hz = /bits/ 64 <200000000>;
167                     required-opps = <&rpmhpd_opp_low_svs>;
170                 opp-300000000 {
171                     opp-hz = /bits/ 64 <300000000>;
172                     required-opps = <&rpmhpd_opp_svs>;
175                 opp-345000000 {
176                     opp-hz = /bits/ 64 <345000000>;
177                     required-opps = <&rpmhpd_opp_svs_l1>;
180                 opp-460000000 {
181                     opp-hz = /bits/ 64 <460000000>;
182                     required-opps = <&rpmhpd_opp_nom>;
188             compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
190             reg-names = "dsi_ctrl";
192             interrupt-parent = <&mdss>;
201             clock-names = "byte",
208             assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
210             assigned-clock-parents = <&mdss_dsi0_phy 0>,
213             operating-points-v2 = <&dsi_opp_table>;
214             power-domains = <&rpmhpd RPMHPD_MMCX>;
219              #address-cells = <1>;
220                 #size-cells = <0>;
225                         remote-endpoint = <&dpu_intf1_out>;