Lines Matching +full:display +full:- +full:subsystem
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm SM6125 Display MDSS
10 - Marijn Suijten <marijn.suijten@somainline.org>
13 SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
14 like DPU display controller, DSI and DP interfaces etc.
16 $ref: /schemas/display/msm/mdss-common.yaml#
20 const: qcom,sm6125-mdss
24 - description: Display AHB clock from gcc
25 - description: Display AHB clock
26 - description: Display core clock
28 clock-names:
30 - const: iface
31 - const: ahb
32 - const: core
39 - description: Interconnect path from mdp0 port to the data bus
40 - description: Interconnect path from CPU to the reg bus
42 interconnect-names:
44 - const: mdp0-mem
45 - const: cpu-cfg
48 "^display-controller@[0-9a-f]+$":
54 const: qcom,sm6125-dpu
56 "^dsi@[0-9a-f]+$":
63 - const: qcom,sm6125-dsi-ctrl
64 - const: qcom,mdss-dsi-ctrl
66 "^phy@[0-9a-f]+$":
72 const: qcom,sm6125-dsi-phy-14nm
77 - |
78 #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
79 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
80 #include <dt-bindings/clock/qcom,rpmcc.h>
81 #include <dt-bindings/interrupt-controller/arm-gic.h>
82 #include <dt-bindings/power/qcom-rpmpd.h>
84 display-subsystem@5e00000 {
85 compatible = "qcom,sm6125-mdss";
87 reg-names = "mdss";
90 interrupt-controller;
91 #interrupt-cells = <1>;
96 clock-names = "iface",
100 power-domains = <&dispcc MDSS_GDSC>;
104 #address-cells = <1>;
105 #size-cells = <1>;
108 display-controller@5e01000 {
109 compatible = "qcom,sm6125-dpu";
112 reg-names = "mdp", "vbif";
114 interrupt-parent = <&mdss>;
124 clock-names = "bus",
131 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
132 assigned-clock-rates = <19200000>;
134 operating-points-v2 = <&mdp_opp_table>;
135 power-domains = <&rpmpd SM6125_VDDCX>;
138 #address-cells = <1>;
139 #size-cells = <0>;
144 remote-endpoint = <&mdss_dsi0_in>;
151 compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
153 reg-names = "dsi_ctrl";
155 interrupt-parent = <&mdss>;
164 clock-names = "byte",
170 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
172 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
174 operating-points-v2 = <&dsi_opp_table>;
175 power-domains = <&rpmpd SM6125_VDDCX>;
178 phy-names = "dsi";
180 #address-cells = <1>;
181 #size-cells = <0>;
184 #address-cells = <1>;
185 #size-cells = <0>;
190 remote-endpoint = <&dpu_intf1_out>;
203 compatible = "qcom,sm6125-dsi-phy-14nm";
207 reg-names = "dsi_phy",
211 #clock-cells = <1>;
212 #phy-cells = <0>;
216 clock-names = "iface",
219 required-opps = <&rpmpd_opp_nom>;
220 power-domains = <&rpmpd SM6125_VDDMX>;