Lines Matching +full:x +full:- +full:powers
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
21 - adi,adv7511
22 - adi,adv7511w
23 - adi,adv7513
37 reg-names:
40 needing a non-default address.
43 - const: main
44 - const: edid
45 - const: cec
46 - const: packet
52 clock-names:
58 pd-gpios:
62 avdd-supply:
63 description: A 1.8V supply that powers up the AVDD pin.
65 dvdd-supply:
66 description: A 1.8V supply that powers up the DVDD pin.
68 pvdd-supply:
69 description: A 1.8V supply that powers up the PVDD pin.
71 dvdd-3v-supply:
72 description: A 3.3V supply that powers up the DVDD_3V pin.
74 bgvdd-supply:
75 description: A 1.8V supply that powers up the BGVDD pin.
77 adi,input-depth:
82 adi,input-colorspace:
86 adi,input-clock:
89 "1x": one clock cycle per pixel
90 "2x": two clock cycles per pixel
92 enum: [ 1x, 2x, dd ]
94 adi,clock-delay:
97 (-1200ps .. 1600 ps).
101 adi,embedded-sync:
107 adi,input-style:
114 adi,input-justification:
136 # adi,input-colorspace and adi,input-clock are required except in
137 # "rgb 1x" and "yuv444 1x" modes, in which case they must not be
142 adi,input-colorspace:
145 adi,input-clock:
147 const: 1x
151 - adi,input-style
152 - adi,input-justification
156 adi,input-style: false
157 adi,input-justification: false
161 - compatible
162 - reg
163 - ports
164 - adi,input-depth
165 - adi,input-colorspace
166 - adi,input-clock
167 - avdd-supply
168 - dvdd-supply
169 - pvdd-supply
170 - dvdd-3v-supply
171 - bgvdd-supply
176 - |
177 #include <dt-bindings/interrupt-controller/irq.h>
180 #address-cells = <1>;
181 #size-cells = <0>;
192 reg-names = "main", "edid";
193 interrupt-parent = <&gpio3>;
196 clock-names = "cec";
197 avdd-supply = <&v1v8>;
198 dvdd-supply = <&v1v8>;
199 pvdd-supply = <&v1v8>;
200 dvdd-3v-supply = <&v3v3>;
201 bgvdd-supply = <&v1v8>;
203 adi,input-depth = <8>;
204 adi,input-colorspace = "yuv422";
205 adi,input-clock = "1x";
207 adi,input-style = <3>;
208 adi,input-justification = "right";
210 #address-cells = <1>;
211 #size-cells = <0>;
216 remote-endpoint = <&dpi_out>;
223 remote-endpoint = <&hdmi_connector_in>;
230 remote-endpoint = <&i2s0_cpu_endpoint>;