Lines Matching +full:spread +full:- +full:spectrum

4 register-mapped DPLL with usually two selectable input clocks
9 sub-types, which effectively result in slightly different setup
12 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
15 - compatible : shall be one of:
16 		"ti,omap3-dpll-clock",
17 		"ti,omap3-dpll-core-clock",
18 		"ti,omap3-dpll-per-clock",
19 		"ti,omap3-dpll-per-j-type-clock",
20 		"ti,omap4-dpll-clock",
21 		"ti,omap4-dpll-x2-clock",
22 		"ti,omap4-dpll-core-clock",
23 		"ti,omap4-dpll-m4xen-clock",
24 		"ti,omap4-dpll-j-type-clock",
25 		"ti,omap5-mpu-dpll-clock",
26 		"ti,am3-dpll-no-gate-clock",
27 		"ti,am3-dpll-j-type-clock",
28 		"ti,am3-dpll-no-gate-j-type-clock",
29 		"ti,am3-dpll-clock",
30 		"ti,am3-dpll-core-clock",
31 		"ti,am3-dpll-x2-clock",
32 		"ti,omap2-dpll-core-clock",
34 - #clock-cells : from common clock binding; shall be set to 0.
35 - clocks : link phandles of parent clocks, first entry lists reference clock
37 - reg : offsets for the register set for controlling the DPLL.
39 	"control" - contains the control register base address
40 	"idlest" - contains the idle status register base address
41 	"mult-div1" - contains the multiplier / divider register base address
42 	"autoidle" - contains the autoidle register base address (optional)
43 	"ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
45 	"ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
48   ti,am3-* dpll types do not have autoidle register
49   ti,omap2-* dpll type does not support idlest / autoidle registers
52 - DPLL mode setting - defining any one or more of the following overrides
54 	- ti,low-power-stop : DPLL supports low power stop mode, gating output
55 	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
56 	- ti,lock : DPLL locks in programmed rate
57 	- ti,min-div : the minimum divisor to start from to round the DPLL
59 	- ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
61 	- ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
62 			      spectrum modulation frequency
63 	- ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
68 		#clock-cells = <0>;
69 		compatible = "ti,omap4-dpll-core-clock";
75 		#clock-cells = <0>;
76 		compatible = "ti,omap3-dpll-clock";
78 		ti,low-power-stop;
79 		ti,low-power-bypass;
85 		#clock-cells = <0>;
86 		compatible = "ti,am3-dpll-core-clock";
92 		#clock-cells = <0>;
93 		compatible = "ti,omap2-dpll-core-clock";
99 		#clock-cells = <0>;
100 		compatible = "ti,am3-dpll-no-gate-clock";