Lines Matching +full:four +full:- +full:cell

4 Pistachio has four clock controllers (core clock, peripheral clock, peripheral
6 from the device-tree.
9 ----------------
12 defined with the following clock-output-names:
13 - "xtal": External 52Mhz oscillator (required)
14 - "audio_clk_in": Alternate audio reference clock (optional)
15 - "enet_clk_in": Alternate ethernet PHY clock (optional)
18 ----------------------
21 co-processor), audio, and several peripherals.
24 - compatible: Must be "img,pistachio-clk".
25 - reg: Must contain the base address and length of the core clock controller.
26 - #clock-cells: Must be 1.  The single cell is the clock identifier.
27   See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
28 - clocks: Must contain an entry for each clock in clock-names.
29 - clock-names: Must include "xtal" (see "External clocks") and
31   top-level general control.
34 	clk_core: clock-controller@18144000 {
35 		compatible = "img,pistachio-clk";
39 		clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
41 		#clock-cells = <1>;
45 ----------------------------
52 - compatible: Must be "img,pistachio-periph-clk".
53 - reg: Must contain the base address and length of the peripheral clock
55 - #clock-cells: Must be 1.  The single cell is the clock identifier.
56   See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
57 - clocks: Must contain an entry for each clock in clock-names.
58 - clock-names: Must include "periph_sys", the peripheral system clock generated
62 	clk_periph: clock-controller@18144800 {
63 		compatible = "img,pistachio-clk-periph";
66 		clock-names = "periph_sys";
68 		#clock-cells = <1>;
72 ---------------------------
80 - compatible: Must include "img,pistachio-periph-cr" and "syscon".
81 - reg: Must contain the base address and length of the peripheral general
83 - #clock-cells: Must be 1.  The single cell is the clock identifier.
84   See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
85 - clocks: Must contain an entry for each clock in clock-names.
86 - clock-names: Must include "sys", the system clock generated by the peripheral
91 		compatible = "img,pistachio-cr-periph", "syscon";
94 		clock-names = "sys";
96 		#clock-cells = <1>;
99 Top-level general control:
100 --------------------------
102 The top-level general control block contains miscellaneous control registers and
106 - compatible: Must include "img,pistachio-cr-top" and "syscon".
107 - reg: Must contain the base address and length of the top-level
109 - clocks: Must contain an entry for each clock in clock-names.
110 - clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
112 - #clock-cells: Must be 1.  The single cell is the clock identifier.
113   See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
117 		compatible = "img,pistachio-cr-top", "syscon";
120 		clock-names = "audio_clk_in", "enet_clk_in";
122 		#clock-cells = <1>;