Lines Matching +full:modem +full:- +full:control +full:- +full:line +full:- +full:ports
2 The Intel Assabet (SA-1110 evaluation) board
13 -------------------
25 -----------------------
39 John Dorsey has produced add-on patches to add support for Assabet and
55 - ftp://ftp.netwinder.org/users/n/nico/
56 - ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
57 - ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
59 Look for redboot-assabet*.tgz. Some installation infos are provided in
60 redboot-assabet*.txt.
64 -----------------------------
67 on-line at http://sources.redhat.com/ecos/docs.html.
70 If you have a CF network card (my Assabet kit contained a CF+ LP-E from
77 fis init -f
79 To initialize the non-volatile settings, like whether you want to use BOOTP or
82 fconfig -i
86 ---------------------------------
91 load zImage -r -b 0x100000
93 If you rather want to use Y-Modem upload over the serial port::
95 load -m ymodem -r -b 0x100000
99 fis create "Linux kernel" -b 0x100000 -l 0xc0000
103 ------------------
108 load ramdisk_image.gz -r -b 0x800000
110 Again, Y-Modem upload can be used instead of TFTP by replacing the file name
111 by '-y ymodem'.
119 exec -b 0x100000 -l 0xc0000
122 solutions for on-flash filesystems as mentioned below.
126 -----------
130 conjunction with the MTD layer which is responsible for low-level flash
131 management. More information on the Linux MTD can be found on-line at:
132 http://www.linux-mtd.infradead.org/. A JFFS howto with some infos about
140 load sample_img.jffs2 -r -b 0x100000
144 RedBoot> load sample_img.jffs2 -r -b 0x100000
145 Raw file loaded 0x00100000-0x00377424
162 size of unallocated flash: 0x503c0000 - 0x500e0000 = 0x2e0000
163 size of the filesystem image: 0x00377424 - 0x00100000 = 0x277424
168 fis unlock -f 0x500E0000 -l 0x2e0000
169 fis erase -f 0x500E0000 -l 0x2e0000
170 fis write -b 0x100000 -l 0x277424 -f 0x500E0000
171 fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000
187 SA1100 flash: probing 32-bit flash bus
188 SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
191 0x00000000-0x00020000 : "RedBoot"
192 0x00020000-0x000e0000 : "Linux kernel"
193 0x000e0000-0x003c0000 : "JFFS2"
194 0x003c0000-0x003e0000 : "RedBoot config"
195 0x003e0000-0x00400000 : "FIS directory"
203 exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2"
215 -----------------
227 Enter script, terminate with empty line
228 >> load zImage -r -b 0x100000
229 >> load ramdisk_ks.gz -r -b 0x800000
230 >> exec -b 0x100000 -l 0xc0000
236 Update RedBoot non-volatile configuration - are you sure (y/n)? y
248 Status of peripherals in -rmk tree (updated 14/10/2001)
249 -------------------------------------------------------
252 Serial ports:
254 - PM: Not tested.
255 - COM: TX, RX, CTS, DSR, DCD, RTS, DTR, PM
256 - PM: Not tested.
257 - I2C: Implemented, not fully tested.
258 - L3: Fully tested, pass.
259 - PM: Not tested.
262 - LCD: Fully tested. PM
266 - Video out: Not fully
270 - Playback: Fully tested, pass.
271 - Record: Implemented, not tested.
272 - PM: Not tested.
275 - Audio play: Implemented, not heavily tested.
276 - Audio rec: Implemented, not heavily tested.
277 - Telco audio play: Implemented, not heavily tested.
278 - Telco audio rec: Implemented, not heavily tested.
279 - POTS control: No
280 - Touchscreen: Yes
281 - PM: Not tested.
284 - PCMCIA:
285 - LPE: Fully tested, pass.
286 - USB: No
287 - IRDA:
288 - SIR: Fully tested, pass.
289 - FIR: Fully tested, pass.
290 - PM: Not tested.
293 Serial ports:
294 - COM1,2: TX, RX, CTS, DSR, DCD, RTS, DTR
295 - PM: Not tested.
296 - USB: Implemented, not heavily tested.
297 - PCMCIA: Implemented, not heavily tested.
298 - CF: Implemented, not heavily tested.
299 - PM: Not tested.
301 More stuff can be found in the -np (Nicolas Pitre's) tree.