Lines Matching full:frequency
15 - https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enha…
88 guaranteed base frequency. Once the user issues a command to use a specific
90 a change in the base frequency dynamically. This feature is called
154 base-frequency(MHz):2600
168 condition is met, then base frequency of 2600 MHz can be maintained. To
183 base-frequency(MHz):2800
191 frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0.
211 This matches the base-frequency (MHz) field value displayed from the
212 "perf-profile info" command for performance level 0(cpufreq frequency is in
215 To check if the average frequency is equal to the base frequency for a 100% busy
224 To verify the base frequency, run turbostat::
261 Which shows that the base frequency now increased from 2600 MHz at performance
291 other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency
292 (Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel
329 configuration allows definitions of parameters, which affects how the frequency
433 clos frequency weight is not specified, default: 0
449 "min" and set the base frequency to always get guaranteed base frequency.
468 clos-max:Max Turbo frequency
478 clos-max:Max Turbo frequency
505 Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency
536 Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF)
539 The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
540 the user control base frequency. If some critical workload threads demand
542 the thread at higher base frequency on specific sets of CPUs (high priority
543 CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs.
578 frequency of guaranteed frequency 2600 MHz.
599 2 of the CPUs are busy and reaching max. frequency (which would be the base
600 frequency as the turbo is disabled). The turbostat output::
620 full guaranteed frequency of 2600 MHz.
635 high-priority-base-frequency(MHz):3000
638 low-priority-base-frequency(MHz):2400
643 offer base frequency of 3000 MHz compared to the standard base frequency at this
682 - Discover Intel(R) SST-BF and note low and high priority base frequency
728 Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
733 configured to get higher turbo frequency by designating them as high priority at
734 the cost of lower or no turbo frequency on the low priority cores.
740 The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
764 frequency properties with Intel(R) SST-TF enabled and compare to the base turbo
784 max-turbo-frequency(MHz):3200
787 max-turbo-frequency(MHz):3100
790 max-turbo-frequency(MHz):3100
793 max-turbo-frequency(MHz):3100
796 max-turbo-frequency(MHz):3100
799 max-turbo-frequency(MHz):3100
802 max-turbo-frequency(MHz):3100
805 max-turbo-frequency(MHz):3100
807 Based on the data above, when all the CPUS are busy, the max. frequency of 3100
837 Based on turbostat output, the performance is limited by frequency cap of 3100
856 high-priority-max-frequency(MHz):3200
857 high-priority-max-avx2-frequency(MHz):3200
858 high-priority-max-avx512-frequency(MHz):3100
861 high-priority-max-frequency(MHz):3100
862 high-priority-max-avx2-frequency(MHz):3000
863 high-priority-max-avx512-frequency(MHz):2900
866 high-priority-max-frequency(MHz):3100
867 high-priority-max-avx2-frequency(MHz):3000
868 high-priority-max-avx512-frequency(MHz):2900
870 low-priority-max-frequency(MHz):2600
871 low-priority-max-avx2-frequency(MHz):2400
872 low-priority-max-avx512-frequency(MHz):2100
876 turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
881 cores will be clipped to a lower frequency of 2600 MHz.
915 - Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency
919 …e desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency