Lines Matching +full:1 +full:mhz
69 Platform: API version : 1
70 Platform: Driver version : 1
71 Platform: mbox supported : 1
72 Platform: mmio supported : 1
106 package-1
131 package-1
152 enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41
154 base-frequency(MHz):2600
168 condition is met, then base frequency of 2600 MHz can be maintained. To
181 enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39
183 base-frequency(MHz):2800
211 This matches the base-frequency (MHz) field value displayed from the
218 # echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
226 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
231 0 1 1 2600
261 Which shows that the base frequency now increased from 2600 MHz at performance
262 level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
263 use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
348 0: Proportional, 1: Ordered
379 package-1
401 package-1
424 Specify clos min in MHz with [--min|-n]
425 Specify clos max in MHz with [--max|-m]
434 clos min is not specified, default: 0 MHz
435 clos max is not specified, default: 25500 MHz
442 package-1
467 clos-min:0 MHz
469 clos-desired:0 MHz
470 package-1
477 clos-min:0 MHz
479 clos-desired:0 MHz
514 package-1
575 #echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
578 frequency of guaranteed frequency 2600 MHz.
602 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
605 0 1 1 1005
620 full guaranteed frequency of 2600 MHz.
635 high-priority-base-frequency(MHz):3000
638 low-priority-base-frequency(MHz):2400
643 offer base frequency of 3000 MHz compared to the standard base frequency at this
647 high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this
651 400 MHz.
666 package-1
700 observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz.
703 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
706 0 1 1 2166
784 max-turbo-frequency(MHz):3200
785 bucket-1
787 max-turbo-frequency(MHz):3100
790 max-turbo-frequency(MHz):3100
793 max-turbo-frequency(MHz):3100
796 max-turbo-frequency(MHz):3100
799 max-turbo-frequency(MHz):3100
802 max-turbo-frequency(MHz):3100
805 max-turbo-frequency(MHz):3100
808 MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
820 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
823 0 1 1 3000
838 MHz. To check if the hackbench performance can be improved for CPU 12 and CPU
856 high-priority-max-frequency(MHz):3200
857 high-priority-max-avx2-frequency(MHz):3200
858 high-priority-max-avx512-frequency(MHz):3100
859 bucket-1
861 high-priority-max-frequency(MHz):3100
862 high-priority-max-avx2-frequency(MHz):3000
863 high-priority-max-avx512-frequency(MHz):2900
866 high-priority-max-frequency(MHz):3100
867 high-priority-max-avx2-frequency(MHz):3000
868 high-priority-max-avx512-frequency(MHz):2900
870 low-priority-max-frequency(MHz):2600
871 low-priority-max-avx2-frequency(MHz):2400
872 low-priority-max-avx512-frequency(MHz):2100
876 turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
881 cores will be clipped to a lower frequency of 2600 MHz.
901 package--1
932 turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost.
935 #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1