Lines Matching +full:non +full:- +full:identical

1 .. SPDX-License-Identifier: GPL-2.0
8 Copyright |copy| 2023 - 2025 Digiteq Automotive
12 card capable of capturing and generating FPD-Link III and GMSL2/3 video streams
16 ---------------
22 There are two types of parameters - global / PCI card related, found under
32     | 0 - No module present
33     | 1 - FPDL3
34     | 2 - GMSL (one serializer, two daisy chained deserializers)
35     | 3 - GMSL (one serializer, two deserializers)
36     | 4 - GMSL (two deserializers with two daisy chain outputs)
44     | 1 - FPDL3
45     | 2 - GMSL
53         PRODUCT-REVISION-SERIES-SERIAL
66     | 0 - single
67     | 1 - dual (default)
72     | 0 - OLDI/JEIDA
73     | 1 - SPWG/VESA (default)
83     | 0 - unlocked
84     | 1 - locked
93     | 0 - not detected
94     | 1 - detected
99     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the width
105     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the height
114     | 0 - active low
115     | 1 - active high
116     | 2 - not available
124     | 0 - active low
125     | 1 - active high
126     | 2 - not available
146     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
155     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
161     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
168     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
175     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
182     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
189     The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in
198     | 0 - PLL < 50MHz (default)
199     | 1 - PLL >= 50MHz
216     | 0 - input 0
217     | 1 - input 1
218     | 2 - v4l2 output 0
219     | 3 - v4l2 output 1
252     | 0 - active low (default)
253     | 1 - active high
258     | 0 - active low (default)
259     | 1 - active high
264     | 0 - active low
265     | 1 - active high (default)
268     Output pixel clock frequency. Allowed values are between 25000-190000(kHz)
269     and there is a non-linear stepping between two consecutive allowed
306     | 0 - auto (default)
307     | 1 - single
308     | 2 - dual
316     | 0 - auto (default)
317     | 1 - single
318     | 2 - dual
326     | 0 - 12Gb/s (default)
327     | 1 - 6Gb/s
328     | 2 - 3Gb/s
329     | 3 - 1.5Gb/s
332     The GMSL multi-stream contains up to four video streams. This parameter
334     zero-based index of the stream. The default stream id is 0.
342     | 0 - disabled
343     | 1 - enabled (default)
346 --------------
349  - mgb4-fw.X - FPGA firmware.
350  - mgb4-data.X - Factory settings, e.g. card serial number.
352 The *mgb4-fw* partition is writable and is used for FW updates, *mgb4-data* is
353 read-only. The *X* attached to the partition name represents the card number.
355 also have a third partition named *mgb4-flash* available in the system. This
360 --------------
368 	| bit 1 - trigger 1 pending
369 	| bit 2 - trigger 2 pending
370 	| bit 5 - trigger 1 level
371 	| bit 6 - trigger 2 level
385 buffer mode - the values do not represent valid data in such case.*