Lines Matching full:pad

140 This is the MIPI CSI-2 receiver entity. It has one sink pad to receive
168 single source pad that routes to a CSI (ipuX_csiY entities).
186 These are the CSI entities. They have a single sink pad receiving from
190 This entity has two source pads. The first source pad can link directly
194 When the direct source pad is routed to the ipuX_ic_prp entity, frames
198 When the direct source pad is routed to the ipuX_vdic entity, the VDIC
202 The second source pad sends video frames directly to memory buffers
204 source pad is routed to a capture device node, with a node name of the
207 Note that since the IDMAC source pad makes use of an IDMAC channel,
209 IDMAC channel. For example, if the CSI sink pad is receiving in UYVY
210 order, the capture device linked to the IDMAC source pad can capture
211 in YUYV order. Also, if the CSI sink pad is receiving a packed YUV
215 The IDMAC channel at the IDMAC source pad also supports simple
217 pad's field type is sequential top-bottom or bottom-top, and the
220 field order as the source pad field order (interlaced-bt if source pad
221 is seq-bt, interlaced-tb if source pad is seq-tb).
229 implemented in the ipuX_csiY entities at the sink pad, using the
234 the sink pad, using the compose selection subdev API.
236 The output rectangle at the ipuX_csiY source pad is the same as
237 the compose rectangle at the sink pad. So the source pad rectangle
239 API at sink pad (if /2 downscale is desired, otherwise source pad
259 at the source pad.
262 rate by half at the IDMAC output source pad:
280 has two sink pads and a single source pad.
282 The direct sink pad receives from an ipuX_csiY direct pad. With this
285 When the IDMAC sink pad is activated, it receives from an output
289 is not implemented yet, so this sink pad currently has no links.
291 The source pad routes to the IC pre-processing entity ipuX_ic_prp.
297 data from its sink pad to one or both of its source pads.
299 This entity has a single sink pad. The sink pad can receive from the
300 ipuX_csiY direct pad, or from ipuX_vdic.
302 This entity has two source pads. One source pad routes to the
305 can be activated at the same time if the sink pad is receiving from
306 ipuX_csiY. Only the source pad to the pre-process viewfinder task entity
307 can be activated if the sink pad is receiving from ipuX_vdic (frames
314 pad from ipuX_ic_prp, and a single source pad. The source pad is
330 pad from ipuX_ic_prp, and a single source pad. The source pad is routed
371 no conversions, via ipuX_csiY IDMAC source pad:
387 This pipeline routes frames from the CSI direct pad to the VDIC entity to
435 imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are