Lines Matching refs:HW
21 HW Appropriate hardware is enabled.
110 acpi= [HW,ACPI,X86,ARM64,RISCV64,EARLY]
143 acpi_backlight= [HW,ACPI]
158 acpica_no_return_repair [HW, ACPI]
166 acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
167 acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
216 acpi_force_table_verification [HW,ACPI,EARLY]
221 acpi_irq_balance [HW,ACPI]
225 acpi_irq_nobalance [HW,ACPI]
229 acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
232 acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
236 acpi_mask_gpe= [HW,ACPI]
245 acpi_no_auto_serialize [HW,ACPI]
256 acpi_no_static_ssdt [HW,ACPI,EARLY]
266 acpi_no_watchdog [HW,ACPI,WDT]
275 acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
284 acpi_osi= [HW,ACPI] Modify list of supported OS interface strings
347 acpi_sci= [HW,ACPI,EARLY] ACPI System Control Interrupt trigger mode
350 acpi_skip_timer_override [HW,ACPI,EARLY]
354 acpi_sleep= [HW,ACPI] Sleep options
385 acpi_use_timer_override [HW,ACPI,EARLY]
398 ALSA [HW,ALSA]
437 amd_iommu= [HW,X86-64]
460 amd_iommu_dump= [HW,X86-64]
466 amd_iommu_intr= [HW,X86-64]
473 (Default when IOMMU HW support is present.)
510 amijoy.map= [HW,JOY] Amiga joystick support
515 analog.map= [HW,JOY] Analog joystick and gamepad support
520 apc= [HW,SPARC]
561 arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
591 ataflop= [HW,M68k]
593 atarimouse= [HW,MOUSE] Atari Mouse
595 atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
598 atkbd.reset= [HW] Reset keyboard during initialization
600 atkbd.set= [HW] Select keyboard code set
603 atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
606 atkbd.softraw= [HW] Choose between synthetic and real raw mode
609 atkbd.softrepeat= [HW]
671 bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
822 clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
914 com20020= [HW,NET] ARCnet - COM20020 chipset
918 com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
921 com90xx= [HW,NET]
925 condev= [HW,S390] console device
1034 cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
1147 cs89x0_dma= [HW,NET]
1150 cs89x0_media= [HW,NET]
1162 dasd= [HW,NET]
1165 db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
1234 [HW] The size of the default HugeTLB page. This is
1258 [HW] Continue probing hardware even if DMI data
1263 [HW] Activate driver even if SMM BIOS signature does
1268 [HW] Report power status in /proc/i8k
1272 [HW] Allow controlling fans only if SYS_ADMIN
1276 [HW] Factor to multiply fan speed with.
1279 [HW] Maximum configurable fan speed.
1281 dfltcc= [HW,S390]
1613 edac_report= [HW,EDAC] Control how to report EDAC event
1658 eisa_irq_edge= [PARISC,HW]
1706 ether= [HW,NET] Ethernet cards parameters
1737 floppy= [HW]
1868 [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
1873 gamma= [HW,DRM]
1912 [HW] Sets the ranges of gpiochip of for this device.
1915 [HW] Let the driver know GPIO lines should be named.
1922 grcan.enable0= [HW] Configuration of physical interface 0. Determines
1926 grcan.enable1= [HW] Configuration of physical interface 1. Determines
1930 grcan.select= [HW] Select which physical interface to use.
1933 grcan.txsize= [HW] Sets the size of the tx buffer.
1936 grcan.rxsize= [HW] Sets the size of the rx buffer.
2067 hugepages= [HW,EARLY] Number of HugeTLB pages to allocate at boot.
2079 [HW,EARLY] The size of the HugeTLB pages. This is
2089 [HW] The number of threads that should be used to
2097 hugetlb_cma= [HW,CMA,EARLY] The size of a CMA area used for allocation
2108 [HW,CMA,EARLY] When allocating new HugeTLB pages, only
2161 hw_protection= [HW]
2167 i2c_bus= [HW] Override the default board specific I2C bus speed
2173 i2c_touchscreen_props= [HW,ACPI,X86]
2195 i8042.debug [HW] Toggle i8042 debug mode
2197 [HW] Enable printing of interrupt data from the KBD port
2200 i8042.direct [HW] Put keyboard port into non-translated mode
2201 i8042.dumbkbd [HW] Pretend that controller can only read data from
2204 i8042.noaux [HW] Don't check for auxiliary (== mouse) port
2205 i8042.nokbd [HW] Don't check/create keyboard port
2206 i8042.noloop [HW] Disable the AUX Loopback command while probing
2208 i8042.nomux [HW] Don't check presence of an active multiplexing
2210 i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
2212 i8042.notimeout [HW] Ignore timeout condition signalled by controller
2213 i8042.reset [HW] Reset the controller during init, cleanup and
2221 i8042.unlock [HW] Unlock (ignore) the keylock
2222 i8042.kbdreset [HW] Reset device connected to KBD port
2224 [HW] Allow deferred probing upon i8042 probe errors
2226 i810= [HW,DRM]
2248 icn= [HW,ISDN]
2271 idxd.sva= [HW]
2277 idxd.tc_override= [HW]
2465 inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
2508 intel_idle.max_cstate= [KNL,HW,ACPI,X86]
2603 AMD Gart HW IOMMU-specific options:
2676 io7= [HW] IO7 for Marvel-based Alpha systems
2738 irqfixup [HW]
2748 irqpoll [HW]
2820 iucv= [HW,NET]
2822 ivrs_ioapic [HW,X86-64]
2840 ivrs_hpet [HW,X86-64]
2858 ivrs_acpihid [HW,X86-64]
2876 js= [HW,JOY] Analog joystick
2891 keepinitrd [HW,ARM] See retain_initrd.
2959 kgdbdbgp= [KGDB,HW,EARLY] kgdb over EHCI usb debug port.
2970 kgdboc= [KGDB,HW] kgdb over consoles.
2980 kgdboc_earlycon= [KGDB,HW,EARLY]
3221 nVHE depending on HW support.
3654 logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
3816 md= [HW] RAID subsystems devices and level
4026 mga= [HW,DRM]
4041 mini2440= [ARM,HW,KNL]
4239 [HW] Make the MicroTouch USB driver use raw coordinates
4462 [HW] Never suspend the console
4654 [HW,EARLY] Disable all mitigations for the Speculative
4674 nosync [HW,M68K] Disables sync negotiation for all devices.
4785 ohci1394_dma=early [HW,EARLY] enable debugging via the ohci1394 driver.
4801 onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
4916 parkbd.port= [HW] Parallel port number the keyboard adapter is
4919 parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
4923 parport= [HW,PPT] Specify parallel ports. 0 disables.
4937 parport_init_mode= [HW,PPT]
4945 pata_legacy.all= [HW,LIBATA]
4951 pata_legacy.autospeed= [HW,LIBATA]
4956 pata_legacy.ht6560a= [HW,LIBATA]
4962 pata_legacy.ht6560b= [HW,LIBATA]
4968 pata_legacy.iordy_mask= [HW,LIBATA]
4980 pata_legacy.opti82c46x= [HW,LIBATA]
4986 pata_legacy.opti82c611a= [HW,LIBATA]
4992 pata_legacy.pio_mask= [HW,LIBATA]
4999 pata_legacy.probe_all= [HW,LIBATA]
5004 pata_legacy.probe_mask= [HW,LIBATA]
5015 pata_legacy.qdi= [HW,LIBATA]
5020 pata_legacy.winbond= [HW,LIBATA]
5028 pata_platform.pio_mask= [HW,LIBATA]
5040 pcbit= [HW,ISDN]
5334 pcmv= [HW,PCMCIA] BadgePAD 4
5343 pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
5514 processor.max_cstate= [HW,ACPI]
5518 processor.nocst [HW,ACPI]
5542 psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
5544 psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
5546 psmouse.resetafter= [HW,MOUSE]
5550 [HW,MOUSE] Set desired mouse resolution, in dpi.
5552 [HW,MOUSE] Controls Logitech smartscroll autorepeat.
5575 r128= [HW,DRM]
5581 raid= [HW,RAID]
6434 rdt= [HW,X86,RDT]
6761 s390_iommu= [HW,S390]
7021 slram= [HW,MTD]
7023 smart2= [HW]
7044 smsc-ircc2.nopnp [HW] Don't use PNP to discover SMC devices
7045 smsc-ircc2.ircc_cfg= [HW] Device configuration I/O port
7046 smsc-ircc2.ircc_sir= [HW] SIR base I/O port
7047 smsc-ircc2.ircc_fir= [HW] FIR base I/O port
7048 smsc-ircc2.ircc_irq= [HW] IRQ line
7049 smsc-ircc2.ircc_dma= [HW] DMA channel
7050 smsc-ircc2.ircc_transceiver= [HW] Transceiver type:
7077 sonypi.*= [HW] Sony Programmable I/O Control Device driver
7082 deployment of the HW BHI control and the SW BHB
7085 on - (default) Enable the HW or SW mitigation as
7088 vmexit - On systems which don't have the HW mitigation
7188 [HW,EARLY] Control Speculative Store Bypass (SSB) Disable mitigation
7366 ssbd= [ARM64,HW,EARLY]
7412 sti= [PARISC,HW]
7419 sti_font= [HW]
7422 stifb= [HW]
7512 switches= [HW,M68k,EARLY]
7536 tdfx= [HW,DRM]
7550 thermal.act= [HW,ACPI]
7554 thermal.crt= [HW,ACPI]
7558 thermal.off= [HW,ACPI]
7561 thermal.psv= [HW,ACPI]
7566 thermal.tzp= [HW,ACPI]
7621 tpm.disable_pcr_integrity= [HW,TPM]
7638 tpm_suspend_pcr=[HW,TPM]
7647 tpm_tis.interrupts= [HW,TPM]
7944 [x86] recalibrate: force recalibration against a HW timer
7946 obtained from HW or FW using either an MSR or CPUID(0x15).
8026 turbografx.map[2|3]= [HW,JOY]
8433 watchdog timers [HW,WDT] For information on watchdog timers,
8560 xen_emul_unplug= [HW,X86,XEN,EARLY]