Lines Matching +full:on +full:- +full:device
1 0 Unnamed devices (e.g. non-device mounts)
2 0 = reserved as null device number
7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
8 3 = /dev/null Null device
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
12 7 = /dev/full Returns ENOSPC on write
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
45 devices are on major 128 and above and use the PTY
46 master multiplex (/dev/ptmx) to acquire a PTY on
59 To specify format, add to the autodetect device number:
99 NOTE: The letter in the device name (d, q, h or u)
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
113 devices are on major 136 and above.
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
119 For partitions, add to the whole disk device number:
126 For Linux/i386, partitions 1-4 are the primary
148 when its not possible to create the real device nodes
149 because the root filesystem is mounted read-only.
154 0 = /dev/tty Current TTY device
157 3 = /dev/ttyprintk User messages via printk TTY device
158 64 = /dev/cua0 Callout device for ttyS0
160 255 = /dev/cua191 Callout device for ttyS191
163 the section on terminal devices for more information
164 on /dev/console.
167 0 = /dev/lp0 Parallel printer on parport0
168 1 = /dev/lp1 Parallel printer on parport1
192 0 = /dev/loop0 First loop device
193 1 = /dev/loop1 Second loop device
200 8 block SCSI disk devices (0-15)
208 disks (see major number 3) except that the limit on
238 automatic rewind on device close. The MTREW or MTOFFL
240 the device used to access it.
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
267 128 = /dev/beep Fancy beep device
272 133 = /dev/exttrp External device trap
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
283 146 = /dev/graphics Linux/SGI graphics device
285 148 = /dev/gfx Linux/SGI graphics effects device
290 153 = /dev/mergemem Memory merge device
298 161 = /dev/userdma User-space DMA access
309 172 = /dev/usemaclone Semaphore clone device
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
317 180 = /dev/vrbuttons Vr41xx button input device
319 182 = /dev/perfctr Performance-monitoring counters
323 187 = /dev/irnet IrNET device
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
336 200 = /dev/net/tun TAP/TUN network device
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
348 212 = /dev/watchdogs/0 First watchdog device
349 213 = /dev/watchdogs/1 Second watchdog device
350 214 = /dev/watchdogs/2 Third watchdog device
351 215 = /dev/watchdogs/3 Fourth watchdog device
354 218 = /dev/kchuid Inter-process chuid control
362 226 = /dev/systrace Systrace device
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
367 231 = /dev/snapshot System memory snapshot device
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
371 235 = /dev/autofs Autofs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
376 240 = /dev/userio Serio driver testing device
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
383 11 char Raw keyboard device (Linux/SPARC only)
384 0 = /dev/kbd Raw keyboard device
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
425 Each device type has 5 bits (32 minors).
435 4 = /dev/audio Sun-compatible digital audio
437 7 = /dev/audioctl SPARC audio control device
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
474 0 = /dev/cuh0 Callout device for ttyH0
475 1 = /dev/cuh1 Callout device for ttyH1
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
491 20 block Hitachi CD-ROM (under development)
492 0 = /dev/hitcd Hitachi CD-ROM
495 0 = /dev/sg0 First generic SCSI device
496 1 = /dev/sg1 Second generic SCSI device
502 device-naming practice.
508 This device is used on the ARM-based Acorn RiscPC.
516 22 block Second IDE hard disk/CD-ROM interface
517 0 = /dev/hdc Master: whole disk (or CD-ROM)
518 64 = /dev/hdd Slave: whole disk (or CD-ROM)
523 23 char Digiboard serial card - alternate devices
524 0 = /dev/cud0 Callout device for ttyD0
525 1 = /dev/cud1 Callout device for ttyD1
527 23 block Mitsumi proprietary CD-ROM
528 0 = /dev/mcd Mitsumi CD-ROM
543 24 block Sony CDU-535 CD-ROM
544 0 = /dev/cdu535 Sony CDU-535 CD-ROM
546 25 char Stallion serial card - alternate devices
547 0 = /dev/cue0 Callout device for ttyE0
548 1 = /dev/cue1 Callout device for ttyE1
550 64 = /dev/cue64 Callout device for ttyE64
551 65 = /dev/cue65 Callout device for ttyE65
553 128 = /dev/cue128 Callout device for ttyE128
554 129 = /dev/cue129 Callout device for ttyE129
556 192 = /dev/cue192 Callout device for ttyE192
557 193 = /dev/cue193 Callout device for ttyE193
559 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
560 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
561 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
562 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
563 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
568 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
569 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
570 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
571 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
573 27 char QIC-117 tape
574 0 = /dev/qft0 Unit 0, rewind-on-close
575 1 = /dev/qft1 Unit 1, rewind-on-close
576 2 = /dev/qft2 Unit 2, rewind-on-close
577 3 = /dev/qft3 Unit 3, rewind-on-close
578 4 = /dev/nqft0 Unit 0, no rewind-on-close
579 5 = /dev/nqft1 Unit 1, no rewind-on-close
580 6 = /dev/nqft2 Unit 2, no rewind-on-close
581 7 = /dev/nqft3 Unit 3, no rewind-on-close
582 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
583 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
584 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
585 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
586 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
587 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
588 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
589 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
590 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
591 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
592 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
593 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
594 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
595 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
596 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
597 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
599 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
600 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
601 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
602 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
603 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
605 28 char Stallion serial card - card programming
615 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
616 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
617 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
618 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
619 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
629 disks (see major number 3) except that the limit on
638 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
639 0 = /dev/aztcd Aztech CD-ROM
641 30 char iBCS-2 compatibility devices
655 Additionally, iBCS-2 requires the following links:
657 /dev/ip -> /dev/inet/ip
658 /dev/icmp -> /dev/inet/icmp
659 /dev/ggp -> /dev/inet/ggp
660 /dev/ipip -> /dev/inet/ipip
661 /dev/tcp -> /dev/inet/tcp
662 /dev/egp -> /dev/inet/egp
663 /dev/pup -> /dev/inet/pup
664 /dev/udp -> /dev/inet/udp
665 /dev/idp -> /dev/inet/idp
666 /dev/rawip -> /dev/inet/rawip
667 /dev/inet/arp -> /dev/inet/udp
668 /dev/inet/rip -> /dev/inet/udp
669 /dev/nfsd -> /dev/socksys
670 /dev/X0R -> /dev/null (? apparently not required ?)
672 30 block Philips LMS CM-205 CD-ROM
673 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
675 /dev/lmscd is an older name for this device. This
676 driver does not work with the CM-205MS CD-ROM.
678 31 char MPU-401 MIDI
679 0 = /dev/mpu401data MPU-401 data port
680 1 = /dev/mpu401stat MPU-401 status port
696 The read-write (rw) devices support back-caching
698 devices. The read-only devices (ro) support reading
705 32 block Philips LMS CM-206 CD-ROM
706 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
708 33 char Specialix serial card - alternate devices
709 0 = /dev/cux0 Callout device for ttyX0
710 1 = /dev/cux1 Callout device for ttyX1
712 33 block Third IDE hard disk/CD-ROM interface
713 0 = /dev/hde Master: whole disk (or CD-ROM)
714 64 = /dev/hdf Slave: whole disk (or CD-ROM)
728 on.
730 34 block Fourth IDE hard disk/CD-ROM interface
731 0 = /dev/hdg Master: whole disk (or CD-ROM)
732 64 = /dev/hdh Slave: whole disk (or CD-ROM)
755 0 = /dev/route Routing, device updates, kernel to user
758 16 = /dev/tap0 First Ethertap device
760 31 = /dev/tap15 16th Ethertap device
768 128 = /dev/nht0 First IDE tape, no rewind-on-close
769 129 = /dev/nht1 Second IDE tape, no rewind-on-close
782 This device is used for status query, board control
784 accessible as a standard networking "eth" device.
788 39 char ML-16P experimental I/O board
789 0 = /dev/ml16pa-a0 First card, first analog channel
790 1 = /dev/ml16pa-a1 First card, second analog channel
792 15 = /dev/ml16pa-a15 First card, 16th analog channel
793 16 = /dev/ml16pa-d First card, digital lines
794 17 = /dev/ml16pa-c0 First card, first counter/timer
795 18 = /dev/ml16pa-c1 First card, second counter/timer
796 19 = /dev/ml16pa-c2 First card, third counter/timer
797 32 = /dev/ml16pb-a0 Second card, first analog channel
798 33 = /dev/ml16pb-a1 Second card, second analog channel
800 47 = /dev/ml16pb-a15 Second card, 16th analog channel
801 48 = /dev/ml16pb-d Second card, digital lines
802 49 = /dev/ml16pb-c0 Second card, first counter/timer
803 50 = /dev/ml16pb-c1 Second card, second counter/timer
804 51 = /dev/ml16pb-c2 Second card, third counter/timer
822 well as a general "example" device number. It
823 should never be used for a device driver that is being
830 DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
838 0 = /dev/nb0 First network block device
839 1 = /dev/nb1 Second network block device
842 Network Block Device is somehow similar to loopback
847 the net, implementing block device in userland etc.
849 44 char isdn4linux virtual modem - alternate devices
850 0 = /dev/cui0 Callout device for ttyI0
852 63 = /dev/cui63 Callout device for ttyI63
855 0 = /dev/ftla FTL on first Memory Technology Device
856 16 = /dev/ftlb FTL on second Memory Technology Device
857 32 = /dev/ftlc FTL on third Memory Technology Device
859 240 = /dev/ftlp FTL on 16th Memory Technology Device
873 128 = /dev/ippp0 First SyncPPP device
875 191 = /dev/ippp63 64th SyncPPP device
893 46 block Parallel port ATAPI CD-ROM devices
894 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
895 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
896 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
897 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
899 47 char Comtrol Rocketport serial card - alternate devices
900 0 = /dev/cur0 Callout device for ttyR0
901 1 = /dev/cur1 Callout device for ttyR1
928 49 char SDL RISCom serial card - alternate devices
929 0 = /dev/cul0 Callout device for ttyL0
930 1 = /dev/cul1 Callout device for ttyL1
948 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
975 0 = /dev/pd_bdm0 PD BDM interface on lp0
976 1 = /dev/pd_bdm1 PD BDM interface on lp1
977 2 = /dev/pd_bdm2 PD BDM interface on lp2
978 4 = /dev/icd_bdm0 ICD BDM interface on lp0
979 5 = /dev/icd_bdm1 ICD BDM interface on lp1
980 6 = /dev/icd_bdm2 ICD BDM interface on lp2
982 This device is used for the interfacing to the MC683xx
1003 24-hour heart monitoring equipment.
1030 56 block Fifth IDE hard disk/CD-ROM interface
1031 0 = /dev/hdi Master: whole disk (or CD-ROM)
1032 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1042 57 block Sixth IDE hard disk/CD-ROM interface
1043 0 = /dev/hdk Master: whole disk (or CD-ROM)
1044 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1049 58 char Hayes ESP serial card - alternate devices
1050 0 = /dev/cup0 Callout device for ttyP0
1051 1 = /dev/cup1 Callout device for ttyP1
1059 59 block Generic PDA filesystem device
1060 0 = /dev/pda0 First PDA device
1061 1 = /dev/pda1 Second PDA device
1064 The pda devices are used to mount filesystems on
1070 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1072 60-63 char LOCAL/EXPERIMENTAL USE
1074 60-63 block LOCAL/EXPERIMENTAL USE
1084 1 = /dev/scramdisk/1 First encrypted device
1085 2 = /dev/scramdisk/2 Second encrypted device
1087 255 = /dev/scramdisk/255 255th encrypted device
1098 0 = /dev/plink0 First plink device
1099 1 = /dev/plink1 Second plink device
1100 2 = /dev/plink2 Third plink device
1101 3 = /dev/plink3 Fourth plink device
1102 64 = /dev/rplink0 First plink device, raw
1103 65 = /dev/rplink1 Second plink device, raw
1104 66 = /dev/rplink2 Third plink device, raw
1105 67 = /dev/rplink3 Fourth plink device, raw
1106 128 = /dev/plink0d First plink device, debug
1107 129 = /dev/plink1d Second plink device, debug
1108 130 = /dev/plink2d Third plink device, debug
1109 131 = /dev/plink3d Fourth plink device, debug
1110 192 = /dev/rplink0d First plink device, raw, debug
1111 193 = /dev/rplink1d Second plink device, raw, debug
1112 194 = /dev/rplink2d Third plink device, raw, debug
1113 195 = /dev/rplink3d Fourth plink device, raw, debug
1118 65 block SCSI disk devices (16-31)
1126 disks (see major number 3) except that the limit on
1134 66 block SCSI disk devices (32-47)
1142 disks (see major number 3) except that the limit on
1150 67 block SCSI disk devices (48-63)
1158 disks (see major number 3) except that the limit on
1162 0 = /dev/capi20 Control device
1171 68 block SCSI disk devices (64-79)
1179 disks (see major number 3) except that the limit on
1185 69 block SCSI disk devices (80-95)
1193 disks (see major number 3) except that the limit on
1205 70 block SCSI disk devices (96-111)
1213 disks (see major number 3) except that the limit on
1234 71 block SCSI disk devices (112-127)
1242 disks (see major number 3) except that the limit on
1245 72 char Computone IntelliPort II serial card - alternate devices
1246 0 = /dev/cuf0 Callout device for ttyF0
1247 1 = /dev/cuf1 Callout device for ttyF1
1249 63 = /dev/cuf63 Callout device for ttyF63
1250 64 = /dev/cuf64 Callout device for ttyF64
1251 65 = /dev/cuf65 Callout device for ttyF65
1253 127 = /dev/cuf127 Callout device for ttyF127
1254 128 = /dev/cuf128 Callout device for ttyF128
1255 129 = /dev/cuf129 Callout device for ttyF129
1257 191 = /dev/cuf191 Callout device for ttyF191
1258 192 = /dev/cuf192 Callout device for ttyF192
1259 193 = /dev/cuf193 Callout device for ttyF193
1261 255 = /dev/cuf255 Callout device for ttyF255
1270 DAC960 (see major number 48) except that the limit on
1273 73 char Computone IntelliPort II serial card - control devices
1274 0 = /dev/ip2ipl0 Loadware device for board 0
1275 1 = /dev/ip2stat0 Status device for board 0
1276 4 = /dev/ip2ipl1 Loadware device for board 1
1277 5 = /dev/ip2stat1 Status device for board 1
1278 8 = /dev/ip2ipl2 Loadware device for board 2
1279 9 = /dev/ip2stat2 Status device for board 2
1280 12 = /dev/ip2ipl3 Loadware device for board 3
1281 13 = /dev/ip2stat3 Status device for board 3
1290 DAC960 (see major number 48) except that the limit on
1294 0 = /dev/SCI/0 SCI device 0
1295 1 = /dev/SCI/1 SCI device 1
1298 Currently for Dolphin Interconnect Solutions' PCI-SCI
1308 DAC960 (see major number 48) except that the limit on
1325 DAC960 (see major number 48) except that the limit on
1328 76 char Specialix IO8+ serial card - alternate devices
1329 0 = /dev/cuw0 Callout device for ttyW0
1330 1 = /dev/cuw1 Callout device for ttyW1
1332 8 = /dev/cuw8 Callout device for ttyW8
1342 DAC960 (see major number 48) except that the limit on
1356 DAC960 (see major number 48) except that the limit on
1371 DAC960 (see major number 48) except that the limit on
1374 79 char PAM Software's multimodem boards - alternate devices
1375 0 = /dev/cum0 Callout device for ttyM0
1376 1 = /dev/cum1 Callout device for ttyM1
1386 DAC960 (see major number 48) except that the limit on
1399 disks (see major number 3) except that the limit on
1403 0 = /dev/video0 Video capture/overlay device
1405 63 = /dev/video63 Video capture/overlay device
1406 64 = /dev/radio0 Radio device
1408 127 = /dev/radio63 Radio device
1409 128 = /dev/swradio0 Software Defined Radio device
1411 191 = /dev/swradio63 Software Defined Radio device
1427 disks (see major number 3) except that the limit on
1445 disks (see major number 3) except that the limit on
1462 disks (see major number 3) except that the limit on
1476 disks (see major number 3) except that the limit on
1481 1 = /dev/qcntl0 First device pushed
1482 2 = /dev/qcntl1 Second device pushed
1492 disks (see major number 3) except that the limit on
1507 disks (see major number 3) except that the limit on
1510 87 char Sony Control-A1 stereo control bus
1511 0 = /dev/controla0 First device on chain
1512 1 = /dev/controla1 Second device on chain
1522 disks (see major number 3) except that the limit on
1530 88 block Seventh IDE hard disk/CD-ROM interface
1531 0 = /dev/hdm Master: whole disk (or CD-ROM)
1532 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1538 0 = /dev/i2c-0 First I2C adapter
1539 1 = /dev/i2c-1 Second I2C adapter
1542 89 block Eighth IDE hard disk/CD-ROM interface
1543 0 = /dev/hdo Master: whole disk (or CD-ROM)
1544 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1549 90 char Memory Technology Device (RAM, ROM, Flash)
1556 90 block Ninth IDE hard disk/CD-ROM interface
1557 0 = /dev/hdq Master: whole disk (or CD-ROM)
1558 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1563 91 char CAN-Bus devices
1564 0 = /dev/can0 First CAN-Bus controller
1565 1 = /dev/can1 Second CAN-Bus controller
1568 91 block Tenth IDE hard disk/CD-ROM interface
1569 0 = /dev/hds Master: whole disk (or CD-ROM)
1570 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1583 disks (see major number 3) except that the limit on
1597 0 = /dev/dasda First DASD device, major
1598 1 = /dev/dasda1 First DASD device, block 1
1599 2 = /dev/dasda2 First DASD device, block 2
1600 3 = /dev/dasda3 First DASD device, block 3
1601 4 = /dev/dasdb Second DASD device, major
1602 5 = /dev/dasdb1 Second DASD device, block 1
1603 6 = /dev/dasdb2 Second DASD device, block 2
1604 7 = /dev/dasdb3 Second DASD device, block 3
1608 0 = /dev/ipl Filter control device/log file
1609 1 = /dev/ipnat NAT control device/log file
1611 3 = /dev/ipauth Authentication control device/log file
1629 0 = /dev/pg0 First parallel port ATAPI device
1630 1 = /dev/pg1 Second parallel port ATAPI device
1631 2 = /dev/pg2 Third parallel port ATAPI device
1632 3 = /dev/pg3 Fourth parallel port ATAPI device
1637 98 char Control and Measurement Device (comedi)
1638 0 = /dev/comedi0 First comedi device
1639 1 = /dev/comedi1 Second comedi device
1641 47 = /dev/comedi47 48th comedi device
1645 minor number of the associated comedi device and "Y" is the
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/ubdb Second user-mode block device
1659 disks (see major number 3) except that the limit on
1662 This device is used by the user-mode virtual kernel port.
1673 0 = /dev/phone0 First telephony device
1674 1 = /dev/phone1 Second telephony device
1689 For each device, partitions are added as:
1698 102 block Compressed block device
1699 0 = /dev/cbd/a First compressed block device, whole device
1700 16 = /dev/cbd/b Second compressed block device, whole device
1702 240 = /dev/cbd/p 16th compressed block device, whole device
1705 disks (see major number 3) except that the limit on
1709 0 = /dev/nnpfs0 First NNPFS device
1710 1 = /dev/nnpfs1 Second NNPFS device
1713 The NNPFS device gives user mode filesystem
1716 write to <arla-drinkers@stacken.kth.se> or see
1719 103 block Audit device
1720 0 = /dev/audit Audit device
1731 DAC960 (see major number 48) except that the limit on
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1746 DAC960 (see major number 48) except that the limit on
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1761 DAC960 (see major number 48) except that the limit on
1764 107 char 3Dfx Voodoo Graphics device
1765 0 = /dev/3dfx Primary 3Dfx graphics device
1774 DAC960 (see major number 48) except that the limit on
1777 108 char Device independent PPP interface
1778 0 = /dev/ppp Device independent PPP interface
1787 DAC960 (see major number 48) except that the limit on
1799 DAC960 (see major number 48) except that the limit on
1814 DAC960 (see major number 48) except that the limit on
1826 DAC960 (see major number 48) except that the limit on
1834 There is currently a device-naming conflict between
1847 disks (see major number 3) except that the limit on
1850 113 char ISI serial card - alternate devices
1851 0 = /dev/cum0 Callout device for ttyM0
1852 1 = /dev/cum1 Callout device for ttyM1
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1887 disks (see major number 3) except that the limit on
1891 0 = /dev/tipar0 Parallel cable on first parallel port
1893 7 = /dev/tipar7 Parallel cable on seventh parallel port
1895 8 = /dev/tiser0 Serial cable on first serial port
1897 15 = /dev/tiser7 Serial cable on seventh serial port
1903 115 block NetWare (NWFS) Devices (0-255)
1946 The EVMS driver uses a layered, plug-in model to provide
1957 0 = /dev/evms/block_device EVMS block device
1958 1 = /dev/evms/legacyname1 First EVMS legacy device
1959 2 = /dev/evms/legacyname2 Second EVMS legacy device
1963 254 = /dev/evms/EVMSname2 Second EVMS native device
1964 255 = /dev/evms/EVMSname1 First EVMS native device
1967 device names. For example, /dev/hda5 would become
1972 1 = /dev/ica0 IBMCA Device 0
1973 2 = /dev/ica1 IBMCA Device 1
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1988 128-135 char Unix98 PTY masters
1990 These devices should not have corresponding device
1994 128 block SCSI disk devices (128-143)
2002 disks (see major number 3) except that the limit on
2005 129 block SCSI disk devices (144-159)
2013 disks (see major number 3) except that the limit on
2018 130 block SCSI disk devices (160-175)
2026 disks (see major number 3) except that the limit on
2029 131 block SCSI disk devices (176-191)
2037 disks (see major number 3) except that the limit on
2040 132 block SCSI disk devices (192-207)
2048 disks (see major number 3) except that the limit on
2051 133 block SCSI disk devices (208-223)
2059 disks (see major number 3) except that the limit on
2062 134 block SCSI disk devices (224-239)
2070 disks (see major number 3) except that the limit on
2073 135 block SCSI disk devices (240-255)
2081 disks (see major number 3) except that the limit on
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2089 These device nodes are automatically generated with
2092 mount options (distribution dependent, however, on
2167 The SST 5136-DN DeviceNet interface driver has been
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2171 0 = mounted device 256
2172 255 = mounted device 511
2174 145 char SAM9407-based soundcard
2191 Device functions match OSS, but offer a number of
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2196 0 = mounted device 512
2197 255 = mounted device 767
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2200 0 = /dev/scramnet0 First SCRAMNet device
2201 1 = /dev/scramnet1 Second SCRAMNet device
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2205 0 = mounted device 768
2206 255 = mounted device 1023
2208 147 char Aureal Semiconductor Vortex Audio device
2213 147 block Distributed Replicated Block Device (DRBD)
2214 0 = /dev/drbd0 First DRBD device
2215 1 = /dev/drbd1 Second DRBD device
2223 149 char Technology Concepts serial card - alternate devices
2224 0 = /dev/cut0 Callout device for ttyT0
2225 1 = /dev/cut0 Callout device for ttyT1
2228 150 char Real-Time Linux FIFOs
2238 152 char EtherDrive Control Device
2249 0 = /dev/spi0 First SPI device on the bus
2250 1 = /dev/spi1 Second SPI device on the bus
2252 15 = /dev/spi15 Sixteenth SPI device on the bus
2256 1 = /dev/emd/0p1 Partition 1 on First unit
2257 2 = /dev/emd/0p2 Partition 2 on First unit
2259 15 = /dev/emd/0p15 Partition 15 on First unit
2267 disks (see major number 3) except that the limit on
2275 155 char Specialix RIO serial card - alternate devices
2276 0 = /dev/cusr0 Callout device for ttySR0
2278 255 = /dev/cusr255 Callout device for ttySR255
2285 157 char Specialix RIO serial card - alternate devices
2286 0 = /dev/cusr256 Callout device for ttySR256
2288 255 = /dev/cusr511 Callout device for ttySR511
2304 160 block Carmel 8-port SATA Disks on First Controller
2316 disks (see major number 3) except that the limit on
2320 0 = /dev/ircomm0 First IrCOMM device
2321 1 = /dev/ircomm1 Second IrCOMM device
2323 16 = /dev/irlpt0 First IrLPT device
2324 17 = /dev/irlpt1 Second IrLPT device
2327 161 block Carmel 8-port SATA Disks on Second Controller
2339 disks (see major number 3) except that the limit on
2342 162 char Used for (now removed) raw block device interface
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2361 0 = /dev/cuch0 Callout device for ttyCH0
2363 63 = /dev/cuch63 Callout device for ttyCH63
2370 167 char ACM USB modems - alternate devices
2371 0 = /dev/cuacm0 Callout device for ttyACM0
2372 1 = /dev/cuacm1 Callout device for ttyACM1
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2399 173 char Moxa Intellio serial card - alternate devices
2400 0 = /dev/cumx0 Callout device for ttyMX0
2401 1 = /dev/cumx1 Callout device for ttyMX1
2403 127 = /dev/cumx127 Callout device for ttyMX127
2410 175 char SmartIO serial card - alternate devices
2411 0 = /dev/cusi0 Callout device for ttySI0
2412 1 = /dev/cusi1 Callout device for ttySI1
2416 0 = /dev/nfastpci0 First nFast PCI device
2417 1 = /dev/nfastpci1 First nFast PCI device
2438 1 = /dev/mmcblk0p1 First partition on first MMC card
2448 179 char CCube DVXChip-based PCI products
2449 0 = /dev/dvxirq0 First DVX device
2450 1 = /dev/dvxirq1 Second DVX device
2463 96 = /dev/usb/hiddev0 1st USB HID device
2465 111 = /dev/usb/hiddev15 16th USB HID device
2466 112 = /dev/usb/auer0 1st auerswald ISDN device
2468 127 = /dev/usb/auer15 16th auerswald ISDN device
2469 128 = /dev/usb/brlvgr0 First Braille Voyager device
2471 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2472 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2473 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2475 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2476 144 = /dev/usb/lcd USB LCD device
2477 160 = /dev/usb/legousbtower0 1st USB Legotower device
2479 175 = /dev/usb/legousbtower15 16th USB Legotower device
2480 176 = /dev/usb/usbtmc1 First USB TMC device
2482 191 = /dev/usb/usbtmc16 16th USB TMC device
2483 192 = /dev/usb/yurex1 First USB Yurex device
2485 209 = /dev/usb/yurex16 16th USB Yurex device
2488 0 = /dev/uba First USB block device
2489 8 = /dev/ubb Second USB block device
2490 16 = /dev/ubc Third USB block device
2503 183 char SST 5136-DN DeviceNet interface
2508 This device used to be assigned to major number 144.
2522 http://inter-mezzo.org/index.html
2524 186 char Object-based storage control device
2525 0 = /dev/obd0 First obd control device
2526 1 = /dev/obd1 Second obd control device
2531 187 char DESkey hardware encryption device
2541 189 char USB serial converters - alternate devices
2542 0 = /dev/cuusb0 Callout device for ttyUSB0
2543 1 = /dev/cuusb1 Callout device for ttyUSB1
2554 0 = /dev/profile Profiling control device
2555 1 = /dev/profile0 Profiling device for CPU 0
2556 2 = /dev/profile1 Profiling device for CPU 1
2559 193 char Kernel event-tracing interface
2560 0 = /dev/trace Tracing control device
2561 1 = /dev/trace0 Tracing device for CPU 0
2562 2 = /dev/trace1 Tracing device for CPU 1
2573 16 = /dev/mvideo/status1 Second device
2575 32 = /dev/mvideo/status2 Third device
2578 240 = /dev/mvideo/status15 16th device
2585 255 = /dev/nvidiactl Nvidia card control device
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2602 130 = /dev/tnf/trace Tracing device
2631 0 = /dev/vx/rdmp/* First multipath device
2632 1 = /dev/vx/rdmp/* Second multipath device
2635 0 = /dev/vx/dmp/* First multipath device
2636 1 = /dev/vx/dmp/* Second multipath device
2642 202 char CPU model-specific registers
2643 0 = /dev/cpu/0/msr MSRs on CPU 0
2644 1 = /dev/cpu/1/msr MSRs on CPU 1
2647 202 block Xen Virtual Block Device
2655 disks (see major number 3) except that the limit on
2659 0 = /dev/cpu/0/cpuid CPUID on CPU 0
2660 1 = /dev/cpu/1/cpuid CPUID on CPU 1
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2694 51 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 148 = /dev/ttyPSC0 PPC PSC - port 0
2699 153 = /dev/ttyPSC5 PPC PSC - port 5
2710 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2712 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2713 191 = /dev/xvc0 Xen virtual console - port 0
2714 192 = /dev/ttyPZ0 pmac_zilog - port 0
2716 195 = /dev/ttyPZ3 pmac_zilog - port 3
2729 205 char Low-density serial ports (alternate device)
2730 0 = /dev/culu0 Callout device for ttyLU0
2731 1 = /dev/culu1 Callout device for ttyLU1
2732 2 = /dev/culu2 Callout device for ttyLU2
2733 3 = /dev/culu3 Callout device for ttyLU3
2734 4 = /dev/cufb0 Callout device for ttyFB0
2735 5 = /dev/cusa0 Callout device for ttySA0
2736 6 = /dev/cusa1 Callout device for ttySA1
2737 7 = /dev/cusa2 Callout device for ttySA2
2738 8 = /dev/cusc0 Callout device for ttySC0
2739 9 = /dev/cusc1 Callout device for ttySC1
2740 10 = /dev/cusc2 Callout device for ttySC2
2741 11 = /dev/cusc3 Callout device for ttySC3
2742 12 = /dev/cufw0 Callout device for ttyFW0
2743 13 = /dev/cufw1 Callout device for ttyFW1
2744 14 = /dev/cufw2 Callout device for ttyFW2
2745 15 = /dev/cufw3 Callout device for ttyFW3
2746 16 = /dev/cuam0 Callout device for ttyAM0
2748 31 = /dev/cuam15 Callout device for ttyAM15
2749 32 = /dev/cudb0 Callout device for ttyDB0
2751 39 = /dev/cudb7 Callout device for ttyDB7
2752 40 = /dev/cusg0 Callout device for ttySG0
2753 41 = /dev/ttycusmx0 Callout device for ttySMX0
2754 42 = /dev/ttycusmx1 Callout device for ttySMX1
2755 43 = /dev/ttycusmx2 Callout device for ttySMX2
2756 46 = /dev/cucpm0 Callout device for ttyCPM0
2758 51 = /dev/cucpm5 Callout device for ttyCPM5
2759 82 = /dev/cuvr0 Callout device for ttyVR0
2760 83 = /dev/cuvr1 Callout device for ttyVR1
2762 206 char OnStream SC-x0 tape devices
2788 The OnStream SC-x0 SCSI tapes do not support the
2791 maybe ParPort) versions may be driven via ide-scsi or
2792 usb-storage SCSI emulation and this osst device and
2793 driver as well. The ADR-x0 drives are QIC-157
2816 0 = /dev/cuu0 Callout device for ttyU0
2817 1 = /dev/cuu1 Callout device for ttyU1
2821 0 = /dev/sbei/wxcfg0 Configuration device for board 0
2822 1 = /dev/sbei/dld0 Download device for board 0
2823 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2824 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2825 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2826 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2827 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2828 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2829 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2830 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2831 10 = /dev/sbei/wxcfg1 Configuration device for board 1
2832 11 = /dev/sbei/dld1 Download device for board 1
2833 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2834 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2835 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2836 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2837 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2838 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2839 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2840 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2854 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
2855 4 = /dev/dvb/adapter0/demux0 first demux device of first card
2856 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
2858 7 = /dev/dvb/adapter0/net0 first network device of first card
2859 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2869 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
2870 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
2874 0 = /dev/curf0 Callout device for rfcomm0
2875 1 = /dev/curf1 Callout device for rfcomm1
2883 219 char The Logical Company DCI-1300 digital I/O card
2884 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2885 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2916 0 = /dev/cuy0 Callout device for ttyY0
2917 1 = /dev/cuy1 Callout device for ttyY1
2930 228 char IBM 3270 terminal block-mode access
2968 automatic rewind on device close. The MTREW or MTOFFL
2970 the device used to access it.
2976 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
2977 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
2978 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
2980 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
2981 192 = /dev/infiniband/uverbs0 First InfiniBand verbs device
2982 193 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
2984 223 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
2987 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
2988 1 = /dev/biometric/sensor0/iris first iris sensor on first device
2989 2 = /dev/biometric/sensor0/retina first retina sensor on first device
2990 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
2991 4 = /dev/biometric/sensor0/facial first facial sensor on first device
2992 5 = /dev/biometric/sensor0/hand first hand sensor on first device
2994 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
2996 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
3000 0 = /dev/ipath Primary device for programs (any unit)
3005 129 = /dev/ipath_sma Device used by Subnet Management Agent
3006 130 = /dev/ipath_diag Device used by diagnostics programs
3008 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3012 240-254 block LOCAL/EXPERIMENTAL USE
3022 larger number space. No device nodes with this major
3023 should ever be created on the filesystem.
3027 ---LARGE MAJORS!!!!!---
3029 256 char Equinox SST multi-port serial boards
3030 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3031 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3032 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3034 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3055 258 block ROM/Flash read-only translation layer
3062 numbers and allow large numbers of partitions per device
3068 260 char OSD (Object-based-device) SCSI Device
3069 0 = /dev/osd0 First OSD Device
3070 1 = /dev/osd1 Second OSD Device
3072 255 = /dev/osd255 256th OSD Device
3075 0 = /dev/accel/accel0 First acceleration device
3076 1 = /dev/accel/accel1 Second acceleration device
3079 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3082 once the 234-254 range is full.