Lines Matching +full:cm +full:- +full:poll +full:- +full:mode
1 0 Unnamed devices (e.g. non-device mounts)
7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
126 For Linux/i386, partitions 1-4 are the primary
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
212 0 = /dev/st0 First SCSI tape, mode 0
213 1 = /dev/st1 Second SCSI tape, mode 0
215 32 = /dev/st0l First SCSI tape, mode 1
216 33 = /dev/st1l Second SCSI tape, mode 1
218 64 = /dev/st0m First SCSI tape, mode 2
219 65 = /dev/st1m Second SCSI tape, mode 2
221 96 = /dev/st0a First SCSI tape, mode 3
222 97 = /dev/st1a Second SCSI tape, mode 3
224 128 = /dev/nst0 First SCSI tape, mode 0, no rewind
225 129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
227 160 = /dev/nst0l First SCSI tape, mode 1, no rewind
228 161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
230 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
231 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
233 224 = /dev/nst0a First SCSI tape, mode 3, no rewind
234 225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
289 152 = /dev/kpoll Kernel Poll Driver
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
491 20 block Hitachi CD-ROM (under development)
492 0 = /dev/hitcd Hitachi CD-ROM
502 device-naming practice.
508 This device is used on the ARM-based Acorn RiscPC.
516 22 block Second IDE hard disk/CD-ROM interface
517 0 = /dev/hdc Master: whole disk (or CD-ROM)
518 64 = /dev/hdd Slave: whole disk (or CD-ROM)
523 23 char Digiboard serial card - alternate devices
527 23 block Mitsumi proprietary CD-ROM
528 0 = /dev/mcd Mitsumi CD-ROM
543 24 block Sony CDU-535 CD-ROM
544 0 = /dev/cdu535 Sony CDU-535 CD-ROM
546 25 char Stallion serial card - alternate devices
559 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
560 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
561 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
562 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
563 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
568 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
569 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
570 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
571 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
573 27 char QIC-117 tape
574 0 = /dev/qft0 Unit 0, rewind-on-close
575 1 = /dev/qft1 Unit 1, rewind-on-close
576 2 = /dev/qft2 Unit 2, rewind-on-close
577 3 = /dev/qft3 Unit 3, rewind-on-close
578 4 = /dev/nqft0 Unit 0, no rewind-on-close
579 5 = /dev/nqft1 Unit 1, no rewind-on-close
580 6 = /dev/nqft2 Unit 2, no rewind-on-close
581 7 = /dev/nqft3 Unit 3, no rewind-on-close
582 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
583 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
584 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
585 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
586 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
587 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
588 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
589 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
590 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
591 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
592 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
593 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
594 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
595 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
596 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
597 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
599 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
600 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
601 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
602 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
603 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
605 28 char Stallion serial card - card programming
615 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
616 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
617 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
618 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
619 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
638 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
639 0 = /dev/aztcd Aztech CD-ROM
641 30 char iBCS-2 compatibility devices
655 Additionally, iBCS-2 requires the following links:
657 /dev/ip -> /dev/inet/ip
658 /dev/icmp -> /dev/inet/icmp
659 /dev/ggp -> /dev/inet/ggp
660 /dev/ipip -> /dev/inet/ipip
661 /dev/tcp -> /dev/inet/tcp
662 /dev/egp -> /dev/inet/egp
663 /dev/pup -> /dev/inet/pup
664 /dev/udp -> /dev/inet/udp
665 /dev/idp -> /dev/inet/idp
666 /dev/rawip -> /dev/inet/rawip
667 /dev/inet/arp -> /dev/inet/udp
668 /dev/inet/rip -> /dev/inet/udp
669 /dev/nfsd -> /dev/socksys
670 /dev/X0R -> /dev/null (? apparently not required ?)
672 30 block Philips LMS CM-205 CD-ROM
673 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
676 driver does not work with the CM-205MS CD-ROM.
678 31 char MPU-401 MIDI
679 0 = /dev/mpu401data MPU-401 data port
680 1 = /dev/mpu401stat MPU-401 status port
696 The read-write (rw) devices support back-caching
698 devices. The read-only devices (ro) support reading
705 32 block Philips LMS CM-206 CD-ROM
706 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
708 33 char Specialix serial card - alternate devices
712 33 block Third IDE hard disk/CD-ROM interface
713 0 = /dev/hde Master: whole disk (or CD-ROM)
714 64 = /dev/hdf Slave: whole disk (or CD-ROM)
730 34 block Fourth IDE hard disk/CD-ROM interface
731 0 = /dev/hdg Master: whole disk (or CD-ROM)
732 64 = /dev/hdh Slave: whole disk (or CD-ROM)
768 128 = /dev/nht0 First IDE tape, no rewind-on-close
769 129 = /dev/nht1 Second IDE tape, no rewind-on-close
788 39 char ML-16P experimental I/O board
789 0 = /dev/ml16pa-a0 First card, first analog channel
790 1 = /dev/ml16pa-a1 First card, second analog channel
792 15 = /dev/ml16pa-a15 First card, 16th analog channel
793 16 = /dev/ml16pa-d First card, digital lines
794 17 = /dev/ml16pa-c0 First card, first counter/timer
795 18 = /dev/ml16pa-c1 First card, second counter/timer
796 19 = /dev/ml16pa-c2 First card, third counter/timer
797 32 = /dev/ml16pb-a0 Second card, first analog channel
798 33 = /dev/ml16pb-a1 Second card, second analog channel
800 47 = /dev/ml16pb-a15 Second card, 16th analog channel
801 48 = /dev/ml16pb-d Second card, digital lines
802 49 = /dev/ml16pb-c0 Second card, first counter/timer
803 50 = /dev/ml16pb-c1 Second card, second counter/timer
804 51 = /dev/ml16pb-c2 Second card, third counter/timer
849 44 char isdn4linux virtual modem - alternate devices
893 46 block Parallel port ATAPI CD-ROM devices
894 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
895 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
896 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
897 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
899 47 char Comtrol Rocketport serial card - alternate devices
928 49 char SDL RISCom serial card - alternate devices
948 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
983 microcontrollers via Background Debug Mode by use of a
1003 24-hour heart monitoring equipment.
1030 56 block Fifth IDE hard disk/CD-ROM interface
1031 0 = /dev/hdi Master: whole disk (or CD-ROM)
1032 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1042 57 block Sixth IDE hard disk/CD-ROM interface
1043 0 = /dev/hdk Master: whole disk (or CD-ROM)
1044 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1049 58 char Hayes ESP serial card - alternate devices
1070 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1072 60-63 char LOCAL/EXPERIMENTAL USE
1074 60-63 block LOCAL/EXPERIMENTAL USE
1118 65 block SCSI disk devices (16-31)
1134 66 block SCSI disk devices (32-47)
1150 67 block SCSI disk devices (48-63)
1171 68 block SCSI disk devices (64-79)
1185 69 block SCSI disk devices (80-95)
1205 70 block SCSI disk devices (96-111)
1234 71 block SCSI disk devices (112-127)
1245 72 char Computone IntelliPort II serial card - alternate devices
1273 73 char Computone IntelliPort II serial card - control devices
1298 Currently for Dolphin Interconnect Solutions' PCI-SCI
1328 76 char Specialix IO8+ serial card - alternate devices
1374 79 char PAM Software's multimodem boards - alternate devices
1510 87 char Sony Control-A1 stereo control bus
1530 88 block Seventh IDE hard disk/CD-ROM interface
1531 0 = /dev/hdm Master: whole disk (or CD-ROM)
1532 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1538 0 = /dev/i2c-0 First I2C adapter
1539 1 = /dev/i2c-1 Second I2C adapter
1542 89 block Eighth IDE hard disk/CD-ROM interface
1543 0 = /dev/hdo Master: whole disk (or CD-ROM)
1544 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1556 90 block Ninth IDE hard disk/CD-ROM interface
1557 0 = /dev/hdq Master: whole disk (or CD-ROM)
1558 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1563 91 char CAN-Bus devices
1564 0 = /dev/can0 First CAN-Bus controller
1565 1 = /dev/can1 Second CAN-Bus controller
1568 91 block Tenth IDE hard disk/CD-ROM interface
1569 0 = /dev/hds Master: whole disk (or CD-ROM)
1570 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/ubdb Second user-mode block device
1662 This device is used by the user-mode virtual kernel port.
1713 The NNPFS device gives user mode filesystem
1716 write to <arla-drinkers@stacken.kth.se> or see
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1834 There is currently a device-naming conflict between
1850 113 char ISI serial card - alternate devices
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1903 115 block NetWare (NWFS) Devices (0-255)
1946 The EVMS driver uses a layered, plug-in model to provide
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1988 128-135 char Unix98 PTY masters
1994 128 block SCSI disk devices (128-143)
2005 129 block SCSI disk devices (144-159)
2018 130 block SCSI disk devices (160-175)
2029 131 block SCSI disk devices (176-191)
2040 132 block SCSI disk devices (192-207)
2051 133 block SCSI disk devices (208-223)
2062 134 block SCSI disk devices (224-239)
2073 135 block SCSI disk devices (240-255)
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2094 "mode=0620,gid=<gid of the "tty" group>".)
2167 The SST 5136-DN DeviceNet interface driver has been
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2174 145 char SAM9407-based soundcard
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2223 149 char Technology Concepts serial card - alternate devices
2228 150 char Real-Time Linux FIFOs
2275 155 char Specialix RIO serial card - alternate devices
2285 157 char Specialix RIO serial card - alternate devices
2304 160 block Carmel 8-port SATA Disks on First Controller
2327 161 block Carmel 8-port SATA Disks on Second Controller
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2370 167 char ACM USB modems - alternate devices
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2399 173 char Moxa Intellio serial card - alternate devices
2410 175 char SmartIO serial card - alternate devices
2448 179 char CCube DVXChip-based PCI products
2503 183 char SST 5136-DN DeviceNet interface
2522 http://inter-mezzo.org/index.html
2524 186 char Object-based storage control device
2541 189 char USB serial converters - alternate devices
2559 193 char Kernel event-tracing interface
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2642 202 char CPU model-specific registers
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2694 51 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 148 = /dev/ttyPSC0 PPC PSC - port 0
2699 153 = /dev/ttyPSC5 PPC PSC - port 5
2710 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2712 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2713 191 = /dev/xvc0 Xen virtual console - port 0
2714 192 = /dev/ttyPZ0 pmac_zilog - port 0
2716 195 = /dev/ttyPZ3 pmac_zilog - port 3
2729 205 char Low-density serial ports (alternate device)
2762 206 char OnStream SC-x0 tape devices
2763 0 = /dev/osst0 First OnStream SCSI tape, mode 0
2764 1 = /dev/osst1 Second OnStream SCSI tape, mode 0
2766 32 = /dev/osst0l First OnStream SCSI tape, mode 1
2767 33 = /dev/osst1l Second OnStream SCSI tape, mode 1
2769 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2770 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2772 96 = /dev/osst0a First OnStream SCSI tape, mode 3
2773 97 = /dev/osst1a Second OnStream SCSI tape, mode 3
2788 The OnStream SC-x0 SCSI tapes do not support the
2791 maybe ParPort) versions may be driven via ide-scsi or
2792 usb-storage SCSI emulation and this osst device and
2793 driver as well. The ADR-x0 drives are QIC-157
2859 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2883 219 char The Logical Company DCI-1300 digital I/O card
2884 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2885 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2930 228 char IBM 3270 terminal block-mode access
2942 0 = /dev/iseries/vt0 First virtual tape, mode 0
2943 1 = /dev/iseries/vt1 Second virtual tape, mode 0
2945 32 = /dev/iseries/vt0l First virtual tape, mode 1
2946 33 = /dev/iseries/vt1l Second virtual tape, mode 1
2948 64 = /dev/iseries/vt0m First virtual tape, mode 2
2949 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2951 96 = /dev/iseries/vt0a First virtual tape, mode 3
2952 97 = /dev/iseries/vt1a Second virtual tape, mode 3
2954 128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
2955 129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
2957 160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
2958 161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
2960 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2961 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
2963 224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
2964 225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
3008 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3012 240-254 block LOCAL/EXPERIMENTAL USE
3027 ---LARGE MAJORS!!!!!---
3029 256 char Equinox SST multi-port serial boards
3055 258 block ROM/Flash read-only translation layer
3068 260 char OSD (Object-based-device) SCSI Device
3079 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3082 once the 234-254 range is full.