Lines Matching +full:motherboard +full:- +full:bus
1 .. SPDX-License-Identifier: GPL-2.0
37 -------------
51 Self-Monitoring, Analysis and Reporting Technology (SMART).
59 ---------------
72 * **Correctable Error (CE)** - the error detection mechanism detected and
76 * **Uncorrected Error (UE)** - the amount of errors happened above the error
77 correction threshold, and the system was unable to auto-correct.
79 * **Fatal Error** - when an UE error happens on a critical component of the
83 * **Non-fatal Error** - when an UE error happens on an unused component,
91 The mechanism for handling non-fatal errors is usually complex and may
96 ------------------------------------
117 Locator: ChannelA-DIMM0
125 On the above example, a DDR4 SO-DIMM memory module is located at the
154 Such kind of memory is called Error-correcting code memory (ECC memory).
161 ----------
191 mode called "Lock-Step", where it groups two memory modules together,
192 doing 128-bit reads/writes. That gives 16 bits for error correction, with
202 memory modules (or 4 memory modules, if the system is also on Lock-step
208 EDAC - Error Detection And Correction
214 was "out-of-tree" and maintained at http://bluesmoke.sourceforge.net.
222 -------
228 ------
244 -----------------------
249 This new device type allows for non-memory type of ECC hardware detectors
260 PCI bus scanning
261 ----------------
263 In addition, PCI devices are scanned for PCI Bus Parity and SERR Errors
267 There are several add-in adapters that do **not** follow the PCI specification
284 ----------
297 -------
302 hardware-specific modules and have the dependencies load the necessary
314 ---------------
329 ----------------------------
332 are laid out in a Chip-Select Row (``csrowX``) and Channel table (``chX``).
335 .. [#f4] Nowadays, the term DIMM (Dual In-line Memory Module) is widely
337 packaging alternatives, like SO-DIMM, SIMM, etc. The UEFI
346 a given motherboard, memory controller and memory module characteristics.
350 for more than 2 channels, like Fully Buffered DIMMs (FB-DIMMs) memory
353 +------------+-----------------------+
355 +------------+-----------+-----------+
359 +------------+-----------+-----------+
361 +------------+-----------+-----------+
363 +------------+-----------+-----------+
365 +------------+-----------+-----------+
367 +------------+-----------+-----------+
369 +------------+-----------+-----------+
371 In the above example, there are 4 physical slots on the motherboard
374 +---------+---------+
376 +---------+---------+
378 +---------+---------+
380 Labels for these slots are usually silk-screened on the motherboard.
404 |->mc0
405 |->mc1
406 |->mc2
414 |->csrow0
415 |->csrow2
416 |->csrow3
421 order to have dual-channel mode be operational. Since both csrow2 and
429 -------------------
436 Documentation/ABI/testing/sysfs-devices-edac
440 ----------------------------------
498 - ``size`` - Total memory managed by this csrow attribute file
503 - ``dimm_ue_count`` - Uncorrectable Errors count attribute file
510 - ``dimm_ce_count`` - Correctable Errors count attribute file
516 monitored for non-zero values and report such information
519 - ``dimm_dev_type`` - Device type attribute file
525 - x1
526 - x2
527 - x4
528 - x8
530 - ``dimm_edac_mode`` - EDAC Mode of operation attribute file
535 - ``dimm_label`` - memory module label control file
546 motherboard specific and determination of this information
549 - ``dimm_location`` - location of the memory module
556 - *csrow* and *channel* - used when the memory controller
557 doesn't identify a single DIMM - e. g. in ``rankX`` dir;
558 - *branch*, *channel*, *slot* - typically used on FB-DIMM memory
560 - *channel*, *slot* - used on Nehalem and newer Intel drivers.
562 - ``dimm_mem_type`` - Memory Type attribute file
568 - Registered-DDR
569 - Unbuffered-DDR
581 ----------------------
584 directories. As this API doesn't work properly for Rambus, FB-DIMMs and
592 - ``ue_count`` - Total Uncorrectable Errors count attribute file
600 - ``ce_count`` - Total Correctable Errors count attribute file
606 monitored for non-zero values and report such information
610 - ``size_mb`` - Total memory managed by this csrow attribute file
616 - ``mem_type`` - Memory Type attribute file
622 - Registered-DDR
623 - Unbuffered-DDR
626 - ``edac_mode`` - EDAC Mode of operation attribute file
632 - ``dev_type`` - Device type attribute file
638 - x1
639 - x2
640 - x4
641 - x8
644 - ``ch0_ce_count`` - Channel 0 CE Count attribute file
650 - ``ch0_ue_count`` - Channel 0 UE Count attribute file
656 - ``ch0_dimm_label`` - Channel 0 DIMM Label control file
668 motherboard specific and determination of this information
672 - ``ch1_ce_count`` - Channel 1 CE Count attribute file
679 - ``ch1_ue_count`` - Channel 1 UE Count attribute file
686 - ``ch1_dimm_label`` - Channel 1 DIMM Label control file
697 motherboard specific and determination of this information
702 --------------
713 +---------------------------------------+-------------+
717 +---------------------------------------+-------------+
719 +---------------------------------------+-------------+
721 +---------------------------------------+-------------+
723 +---------------------------------------+-------------+
726 +---------------------------------------+-------------+
728 +---------------------------------------+-------------+
730 +---------------------------------------+-------------+
732 +---------------------------------------+-------------+
734 +---------------------------------------+-------------+
735 | And then an optional, driver-specific | |
738 +---------------------------------------+-------------+
741 type, a notice of "no info" and then an optional, driver-specific error
745 PCI Bus Parity Detection
746 ------------------------
752 if parity occurred on the bus on the other side of the bridge.
756 -------------------
762 - ``check_pci_parity`` - Enable/Disable PCI Parity checking control file
764 This control file enables or disables the PCI Bus Parity scanning
777 - ``pci_parity_count`` - Parity Count
784 -----------------
786 - ``edac_mc_panic_on_ue`` - Panic on UE control file
790 occurs - it is indeterminate what was uncorrected and the operating
804 - ``edac_mc_log_ue`` - Log UE control file
820 - ``edac_mc_log_ce`` - Log CE control file
836 - ``edac_mc_poll_msec`` - Polling period control file
855 - ``panic_on_pci_parity`` - Panic on PCI PARITY Error
877 ----------------
891 /sys/devices/system/edac/test-instance
913 One out-of-tree driver uses controls here to allow
921 ---------
926 +----------------+
927 | test-instance0 |
928 +----------------+
940 ------
945 +-------------+
946 | test-block0 |
947 +-------------+
962 test-block-bits-0 for every POLL cycle this counter
964 test-block-bits-1 every 10 cycles, this counter is bumped once,
965 and test-block-bits-0 is set to 0
966 test-block-bits-2 every 100 cycles, this counter is bumped once,
967 and test-block-bits-1 is set to 0
968 test-block-bits-3 every 1000 cycles, this counter is bumped once,
969 and test-block-bits-2 is set to 0
974 reset-counters writing ANY thing to this control will
987 --------------------------------------------------
1043 - ``inject_addrmatch/*``:
1069 - ``inject_eccmask``:
1072 - ``inject_section``:
1079 - ``inject_type``:
1082 bit 0 - repeat
1083 bit 1 - ecc
1084 bit 2 - parity
1086 - ``inject_enable``:
1110 …EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, …
1159 ------------------------------------------
1162 (available from http://support.amd.com/en-us/search/tech-docs):
1185 Models 30h-3Fh Processors
1189 :Link: http://support.amd.com/TechDocs/49125_15h_Models_30h-3Fh_BKDG.pdf
1192 Models 60h-6Fh Processors
1196 :Link: http://support.amd.com/TechDocs/50742_15h_Models_60h-6Fh_BKDG.pdf
1199 Models 00h-0Fh Processors
1210 - 7 Dec 2005
1211 - 17 Jul 2007 Updated
1215 - 05 Aug 2009 Nehalem interface
1216 - 26 Oct 2016 Converted to ReST and cleanups at the Nehalem section
1220 - Doug Thompson, Dave Jiang, Dave Peterson et al,
1221 - Mauro Carvalho Chehab
1222 - Borislav Petkov
1223 - original author: Thayne Harbaugh