Lines Matching +full:operating +full:- +full:mode

20 		supplying power to the system (unless some non-Linux
38 			- off
39 			- on
40 			- error
41 			- fast
42 			- normal
43 			- idle
44 			- standby
50 		and the regulator can't report a detailed operation mode.
52 		"error" indicates an out-of-regulation status such as being
77 		- 'voltage'
78 		- 'current'
79 		- 'unknown'
98 		measured in microvolts (i.e. E-6 Volts), for regulators
113 		setting measured in microamps (i.e. E-6 Amps), for regulators
127 		opmode. This holds the current regulator operating mode,
132 		- 'fast'
133 		- 'normal'
134 		- 'idle'
135 		- 'standby'
136 		- 'unknown'
141 		output operating mode as this value is the same regardless of
143 		attribute may be available to determine the actual mode.
287 		suspend_mem_mode. This holds the regulator operating mode
289 		memory, for regulators implementing suspend mode
298 		suspend_disk_mode. This holds the regulator operating mode
300 		for regulators implementing suspend mode configuration
309 		suspend_standby_mode. This holds the regulator operating mode
311 		standby, for regulators implementing suspend mode
320 		suspend_mem_state. This holds the regulator operating state
333 		suspend_disk_state. This holds the regulator operating state
346 		suspend_standby_state. This holds the regulator operating
359 		bypass.  This indicates if the device is in bypass mode.
363 		- 'enabled'
364 		- 'disabled'
365 		- 'unknown'
367 		'enabled' means the regulator is in bypass mode.
381 		under-voltage fault (1) or not (0).
390 		over-current fault (1) or not (0).
399 		out-of-regulation fault (1) or not (0).
417 		over-temperature fault (1) or not (0).
426 		under-voltage warning (1) or not (0).
435 		over-current warning (1) or not (0).
444 		over-voltage warning (1) or not (0).
453 		over-temperature warning (1) or not (0).