Lines Matching +full:enabled +full:- +full:strings

10 		This will be one of the following strings:
12 		'enabled'
16 		'enabled' means the regulator output is ON and is supplying
20 		supplying power to the system (unless some non-Linux
21 		control has enabled it).
36 		This will be one of the following strings:
38 			- off
39 			- on
40 			- error
41 			- fast
42 			- normal
43 			- idle
44 			- standby
52 		"error" indicates an out-of-regulation status such as being
63 		a regulator may be enabled by another user, even though
75 		This will be one of the following strings:
77 		- 'voltage'
78 		- 'current'
79 		- 'unknown'
98 		measured in microvolts (i.e. E-6 Volts), for regulators
103 		whether the regulator is enabled or disabled.
113 		setting measured in microamps (i.e. E-6 Amps), for regulators
118 		whether the regulator is enabled or disabled.
130 		The opmode value can be one of the following strings:
132 		- 'fast'
133 		- 'normal'
134 		- 'idle'
135 		- 'standby'
136 		- 'unknown'
142 		whether the regulator is enabled or disabled.  A "status"
324 		This will be one of the same strings reported by
337 		This will be one of the same strings reported by
350 		This will be one of the same strings reported by
361 		This will be one of the following strings:
363 		- 'enabled'
364 		- 'disabled'
365 		- 'unknown'
367 		'enabled' means the regulator is in bypass mode.
381 		under-voltage fault (1) or not (0).
390 		over-current fault (1) or not (0).
399 		out-of-regulation fault (1) or not (0).
417 		over-temperature fault (1) or not (0).
426 		under-voltage warning (1) or not (0).
435 		over-current warning (1) or not (0).
444 		over-voltage warning (1) or not (0).
453 		over-temperature warning (1) or not (0).