Lines Matching +full:fast +full:- +full:read
5 Contact: linux-pm@vger.kernel.org
9 Access: Read
14 Contact: linux-pm@vger.kernel.org
18 Access: Read
23 Contact: linux-pm@vger.kernel.org
27 Access: Read
32 Contact: linux-pm@vger.kernel.org
36 Access: Read
43 Contact: linux-pm@vger.kernel.org
58 Access: Read
66 Contact: linux-pm@vger.kernel.org
76 Access: Read
81 Contact: linux-pm@vger.kernel.org
89 Access: Read
94 read-only reporting, unless the 'online' state of the supply
98 Access: Read, Write
106 Contact: linux-pm@vger.kernel.org
118 Access: Read
124 Contact: linux-pm@vger.kernel.org
128 Maximum TBAT temperature trip-wire value where the supply will
129 notify user-space of the event.
133 Maximum supply temperature trip-wire value where the supply
134 will notify user-space of the event.
137 user-space needs to know if the temperature has crossed an
142 Access: Read
148 Contact: linux-pm@vger.kernel.org
153 Minimum TBAT temperature trip-wire value where the supply will
154 notify user-space of the event.
158 Minimum supply temperature trip-wire value where the supply
159 will notify user-space of the event.
161 This is normally used for the charging scenario where user-space
167 Access: Read
173 Contact: linux-pm@vger.kernel.org
184 Access: Read
190 Contact: linux-pm@vger.kernel.org
201 Access: Read
207 Contact: linux-pm@vger.kernel.org
218 Access: Read
224 Contact: linux-pm@vger.kernel.org
235 Access: Read
241 Contact: linux-pm@vger.kernel.org
248 Access: Read
253 read-only reporting, unless the 'online' state of the supply
257 Access: Read, Write
265 Contact: linux-pm@vger.kernel.org
269 Access: Read
271 Valid values: 0 - 100 (percent)
275 Contact: linux-pm@vger.kernel.org
277 Maximum battery capacity trip-wire value where the supply will
278 notify user-space of the event. This is normally used for the
279 battery discharging scenario where user-space needs to know the
284 Access: Read, Write
286 Valid values: 0 - 100 (percent)
290 Contact: linux-pm@vger.kernel.org
292 Minimum battery capacity trip-wire value where the supply will
293 notify user-space of the event. This is normally used for the
294 battery discharging scenario where user-space needs to know the
299 Access: Read, Write
301 Valid values: 0 - 100 (percent)
305 Contact: linux-pm@vger.kernel.org
310 Values close to 0% will be returned after (re-)calibration
315 Access: Read
317 Valid values: 0 - 100 (percent)
321 Contact: linux-pm@vger.kernel.org
325 Access: Read
333 Contact: linux-pm@vger.kernel.org
338 Access: Read, Write
344 Contact: linux-pm@vger.kernel.org
348 Access: Read
354 Contact: linux-pm@vger.kernel.org
359 Access: Read, Write
360 Valid values: 0 - 100 (percent)
364 Contact: linux-pm@vger.kernel.org
372 Access: Read, Write
374 Valid values: 0 - 100 (percent)
378 Contact: linux-pm@vger.kernel.org
384 Fast:
385 Quickly charge the battery using fast-charge
408 Access: Read, Write
411 "Unknown", "N/A", "Trickle", "Fast", "Standard",
416 Contact: linux-pm@vger.kernel.org
421 Access: Read
427 Contact: linux-pm@vger.kernel.org
432 Access: Read
443 Contact: linux-pm@vger.kernel.org
445 Reports the charging current applied during pre-charging phase
448 Access: Read
454 Contact: linux-pm@vger.kernel.org
459 Access: Read
470 Contact: linux-pm@vger.kernel.org
473 is read-only reporting although for some supplies this can be
476 Access: Read, Write
484 Contact: linux-pm@vger.kernel.org
488 Access: Read, Write
493 inhibit-charge: Do not charge while AC is attached
494 force-discharge: Force discharge while AC is attached
499 Contact: linux-pm@vger.kernel.org
503 Access: Read
506 "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
512 Contact: linux-pm@vger.kernel.org
518 Access: Read
524 Contact: linux-pm@vger.kernel.org
529 Access: Read
539 Contact: linux-pm@vger.kernel.org
548 Access: Read, Write
554 Contact: linux-pm@vger.kernel.org
558 system-level knowledge or user input (e.g. This is part of the
566 Access: Read, Write
572 Contact: linux-pm@vger.kernel.org
576 system-level knowledge or user input. Use preferably this
580 Access: Read, Write
586 Contact: linux-pm@vger.kernel.org
590 between online states (e.g. Fixed -> Programmable for a PD_PPS
593 Access: Read, Write
599 1: Online Fixed - Fixed Voltage Supply
600 2: Online Programmable - Programmable Voltage Supply
605 Contact: linux-pm@vger.kernel.org
608 the supply, for example it can show if USB-PD capable source
611 Access: For power-supplies which consume USB power such
613 the connected USB power source and is Read-Only.
615 For power-supplies which act as a USB power-source such as
624 What: /sys/class/power/ds2760-battery.*/charge_now
636 What: /sys/class/power/ds2760-battery.*/charge_full
645 What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer
651 charger operates in fast-charge mode. When the timer expires
652 the device will terminate fast-charge mode (charging current
657 - 5, 6 or 7 (hours),
658 - 0: disabled.
660 What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
666 charger operates in fast-charge mode. When the timer expires
667 the device will terminate fast-charge mode (charging current
672 - 4 - 16 (hours), step by 2 (rounded down)
673 - 0: disabled.
675 What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
681 entering top-off charging mode. When charging current in fast
683 interrupt and start top-off charging mode.
687 - 100000 - 200000 (microamps), step by 25000 (rounded down)
688 - 200000 - 350000 (microamps), step by 50000 (rounded down)
689 - 0: disabled.
691 What: /sys/class/power_supply/max77693-charger/device/top_off_timer
697 charger operates in top-off charge mode. When the timer expires
698 the device will terminate top-off charge mode (charging current
703 - 0 - 70 (minutes), step by 10 (rounded down)
705 What: /sys/class/power_supply/bq24257-charger/ovp_voltage
710 This entry configures the overvoltage protection feature of bq24257-
717 - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
720 What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage
726 bq24257-type charger devices. Once the supply drops to the configured
733 - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
736 What: /sys/class/power_supply/bq24257-charger/high_impedance_enable
741 This entry allows enabling the high-impedance mode of bq24257-type
748 - 1: enabled
749 - 0: disabled
751 What: /sys/class/power_supply/bq24257-charger/sysoff_enable
756 This entry allows enabling the sysoff mode of bq24257-type charger
764 - 1: enabled
765 - 0: disabled
769 Contact: linux-pm@vger.kernel.org
774 Access: Read
780 Contact: linux-pm@vger.kernel.org
784 Access: Read
786 Valid values: 1-12
790 Contact: linux-pm@vger.kernel.org
794 Access: Read
795 Valid values: 1-31