Lines Matching +full:1 +full:as +full:- +full:2020

22 		boot attribute is set to 1.
29 		de-authorization of devices. Value of 1 means user can
30 		de-authorize PCIe tunnel by writing 0 to authorized
38 		for DMA protection. Value of 1 means IOMMU is used 0 means
78 		0   The device will be de-authorized (only supported if
79 		    deauthorization attribute under domain contains 1)
80 		1   The device will be authorized and connected
87 		0   The device will be de-authorized (only supported if
88 		    deauthorization attribute under domain contains 1)
89 		1   The 32 byte hex string is added to the device NVM and
102 Description:	This attribute contains 1 if Thunderbolt device was already
106 Date:		Jan 2020
142 		supports as its input HopID.
145 Date:		Jan 2020
152 Date:		Jan 2020
159 Date:		Jan 2020
166 Date:		Jan 2020
202 		-ENODATA instead as the NVM version is not available.
208 Description:	When new NVM image is written to the non-active NVM
216 		This file will accept writing values "1", "2" or "3".
218 		- Writing "1" will flush the image to the storage
220 		- Writing "2" will run some basic validation on the image
222 		- Writing "3" will authenticate the image that is
233 Date:		Oct 2020
239 		This file will accept writing values "1" or "2"
241 		- Writing "1" will flush the image to the storage
243 		- Writing "2" will run some basic validation on the image
293 Description:	This contains XDomain service specific settings as
300 		Symlink to the USB Type-C connector. This link is only
301 		created when USB Type-C Connector Class is enabled,
317 Description:	Writing 1 to this attribute puts the USB4 port into
322 		on-board retimers. Writing 0 puts the port back to
332 Description:	When the USB4 port is in offline mode writing 1 to this
333 		attribute forces rescan of the sideband for on-board
334 		retimers. Each retimer appear under the USB4 port as if
336 		as if the cable was connected so upgrading their NVM
340 Date:		Oct 2020
346 Date:		Oct 2020
349 Description:	When new NVM image is written to the non-active NVM
351 		authentication procedure is started by writing 1 to
361 Date:		Oct 2020
367 Date:		Oct 2020