Lines Matching +full:turn +full:- +full:on
4 Contact: linux-ide@vger.kernel.org
12 0 OFF - the LED is not activated on activity
13 1 BLINK_ON - the LED blinks on every 10ms when activity is
15 2 BLINK_OFF - the LED is on when idle, and blinks off
19 Note that the user must turn sw_activity OFF it they wish to
26 Contact: linux-ide@vger.kernel.org
34 - If the device does not support the unload heads feature,
35 access is denied with -EOPNOTSUPP.
36 - The maximal value accepted for a timeout is 30000
38 - A previously set timeout can be cancelled and disk can resume
40 - Some hard drives only comply with an earlier version of the
45 to enable it by writing -1. It can be disabled again by
46 writing -2.
47 - Values below -2 are rejected with -EINVAL
50 Documentation/admin-guide/laptops/disk-shock-protection.rst
56 Contact: linux-ide@vger.kernel.org
58 (RW) Write to the file to turn on or off the SATA NCQ (native
68 Contact: linux-ide@vger.kernel.org
71 file for SATA devices connected to a SAS host-bus-adapter
81 Contact: linux-ide@vger.kernel.org
90 Contact: linux-ide@vger.kernel.org
93 file for SATA devices connected to a SAS host-bus-adapter
103 Contact: linux-scsi@vger.kernel.org
112 Contact: linux-scsi@vger.kernel.org
115 feature, write to the file to turn on or off the feature.
118 limits for read and write commands in the kernel and turns on
119 the feature on the device. Writing "0" disables the feature.